wpa_cli
wpa_cli v2.0
Copyright (c) 2004-2012, Jouni Malinen <j@w1.fi> and contributors

This software may be distributed under the terms of the BSD license.
See README for more details.



Interactive mode

Selected interface 'wlan0'
Connection established.
> scan
OK
<3>WPS-AP-AVAILABLE 
> set_network 0 ssid "lamia"
OK
> wps_reg xx:xx:xx:xx:xx:xx 12345670
OK
<3>WPS-AP-AVAILABLE 
<3>Trying to associate with xx:xx:xx:xx:xx:xx (SSID='lamia' freq=2432 MHz)
<3>Associated with xx:xx:xx:xx:xx:xx
<3>CTRL-EVENT-EAP-STARTED EAP authentication started
<3>CTRL-EVENT-EAP-PROPOSED-METHOD vendor=14122 method=1
<3>CTRL-EVENT-EAP-METHOD EAP vendor 14122 method 1 (WSC) selected
<3>WPS-CRED-RECEIVED 
<3>WPS-FAIL msg=11 config_error=0
<3>CTRL-EVENT-EAP-FAILURE EAP authentication failed
<3>WPS-FAIL 
<3>CTRL-EVENT-DISCONNECTED bssid=xx:xx:xx:xx:xx:xx reason=3 locally_generated=1
<3>WPS-AP-AVAILABLE 
<3>Trying to associate with xx:xx:xx:xx:xx:xx (SSID='lamia'freq=2432 MHz)
<3>Associated with xx:xx:xx:xx:xx:xx
<3>WPA: Key negotiation completed with xx:xx:xx:xx:xx:xx [PTK=CCMP GTK=TKIP]
<3>CTRL-EVENT-CONNECTED - Connection to xx:xx:xx:xx:xx:xx completed [id=1 id_str=]

killall wpa_supplicant

ctrl_interface=/var/run/wpa_supplicant

ctrl_interface_group=0

update_config=1

wpa_supplicant -B -i$device -c/etc/wpa_supplicant.conf

wpa_supplicant -iwlan0 -c/etc/wpa_supplicant.conf

wpa_cli wps_reg bssid pin

sshpass -p contraseña ssh usuario@192.168.0.1

warcry ~ # ssh usuario@192.168.0.1
The authenticity of host '192.168.0.1 (192.168.0.1)' can't be established.
RSA key fingerprint is cc:a7:d4:94:3a:3b:aa:f2:ab:13:cd:e5:6a:fc:0a:9a.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.0.1' (RSA) to the list of known hosts.
usuario@192.168.0.1's password: 
 > 

warcry ~ # sshpass -p contraseña ssh usuario@192.168.0.1
>

warcry ~ # unrar x -pcontraseña /root/Desktop/1.rar 

UNRAR 5.30 beta 6 freeware      Copyright (c) 1993-2015 Alexander Roshal


Extracting from /root/Desktop/1.rar

Extracting  1.lst                                                         OK 
All OK
warcry ~ # 

ssh -p 22 usuario:contraseña@192.168.0.168

NAME
     unrar - extract files from rar archives

SYNOPSIS
     unrar <command> [-<switch 1> -<switch N>] archive [files...] [path...]

DESCRIPTION
     This manual page documents briefly the unrar command. 
     This manual page was written for the Debian GNU/Linux distribution 
     because the original program does not have a manual page. 
     Commands and options described here are as of unrar 2.02.

OPTIONS
     After the program name comes a command and then optional switches with  
     dashes before them. A summary of commands is included below. For a complete 
     description, run unrar without options.

     e     Extract files to current directory.

     l     List archive content.

     p     Print file to stdout.

     t     Test archive files.

     v     Verbosely list archive.

     x     Extract files with full path.


SWITCHES
     NOTE: Every switch must be separated by a whitespace. 
     You cannot put them together.

     -av-   Disable AV check.
     
     -c-    Disable comments show.

     -f     Freshen files.

     -kb    Keep broken extracted files.

     -ierr  Send all messages to stderr.

     -inul  Disable all messages.

     -o+    Overwrite existing files.

     -o-    Do not overwrite existing files.

     -p<password>     
            Set password.

     -p-    Do not query password.

     -r     Recurse subdirectories.

     -u     Update files.

     -v     List all volumes.

     -x<file>
            Exclude specified file.

     -x@<list>
            Exclude files in specified list file.

     -x@    Read file names to exclude from stdin.

     -y     Assume Yes on all queries.


SEE ALSO
    The program is documented fully in Rar.Txt which you find in /usr/doc/rar.
    Options described there are same for rar and unrar.

AUTHOR
     This manual page was written by Petr Cech <cech@debian.org> according
     to "unrar -h" for the Debian GNU/Linux system (but may be used by others).

#!/bin/bash

echo -e "¿buenos dias que quieres parsear?
"

read parseo


echo -e "
ya ta ;)
"

echo -e $parseo

warcry Desktop # sh 1.sh
¿buenos dias que quieres parsear?

hola mundo

ya ta ;)

hola mundo
warcry Desktop #

warcry Desktop # sh 1.sh | tee 1.lst
¿buenos dias que quieres parsear?

hola mundo

ya ta ;)

hola mundo
warcry Desktop #

¿buenos dias que quieres parsear?


ya ta ;)

hola mundo

#!/bin/bash

suerte=$(tail -1 1.lst)

echo $suerte

#!/bin/bash

tail -1 1.lst > 2.lst

read suerte < 2.lst

echo $suerte

warcry Desktop # sh 2.sh
hola mundo