Backtrack no detecta adaptador de Red (VMWare- configuración en modo puente)

Backtrack no reconoce ningún adaptador de red cuando la maquina virtual la configuro en modo puente de Red. Aparece la siguiente info cuando reinicio las tarjetas de red.

Citar

root@bt:~# dhcpcd eth0
err, eth0: timed out
warn, eth0: using IPV4LL address 169.254.206.91
root@bt:~# dhcpcd.sh: interface eth0 has been configured with new IP=169.254.206.91
^C
root@bt:~# /etc/init.d/networking restart
* Reconfiguring network interfaces... There is already a pid file /var/run/dhclient.eth0.pid with pid 2226
killed old client process, removed PID file
Internet Systems Consortium DHCP Client V3.1.3
Copyright 2004-2009 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/eth0/00:0c:29:5f:da:ab
Sending on LPF/eth0/00:0c:29:5f:da:ab
Sending on Socket/fallback
DHCPRELEASE on eth0 to 192.168.233.254 port 67
send_packet: Network is unreachable
send_packet: please consult README file regarding broadcast address.
Internet Systems Consortium DHCP Client V3.1.3
Copyright 2004-2009 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/eth0/00:0c:29:5f:da:ab
Sending on LPF/eth0/00:0c:29:5f:da:ab
Sending on Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 18
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
Internet Systems Consortium DHCP Client V3.1.3
Copyright 2004-2009 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

SIOCSIFADDR: No such device
eth1: ERROR while getting interface flags: No such device
eth1: ERROR while getting interface flags: No such device
Bind socket to interface: No such device
Failed to bring up eth1.
Internet Systems Consortium DHCP Client V3.1.3
Copyright 2004-2009 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

SIOCSIFADDR: No such device
eth2: ERROR while getting interface flags: No such device
eth2: ERROR while getting interface flags: No such device
Bind socket to interface: No such device
Failed to bring up eth2.
Internet Systems Consortium DHCP Client V3.1.3
Copyright 2004-2009 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

SIOCSIFADDR: No such device
ath0: ERROR while getting interface flags: No such device
ath0: ERROR while getting interface flags: No such device
Bind socket to interface: No such device
Failed to bring up ath0.
Internet Systems Consortium DHCP Client V3.1.3
Copyright 2004-2009 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

SIOCSIFADDR: No such device
wlan0: ERROR while getting interface flags: No such device
wlan0: ERROR while getting interface flags: No such device
Bind socket to interface: No such device
Failed to bring up wlan0.

sin embargo cuando pongo el adaptador de red de VMware en modo NAT coge IP con normalidad.
Ya he intentado poner la ip manualmente , pero tampoco funciona. no sé que puede estar pasando.

Parece raro que Bactrack no funciona bien en una maquina virtual.

¿Alguna solución?