BIEN `PARA EL ULTIMO MENSAJE EXPUESTO
TENGO LA SOLUCION YA QUE EN FIBERWARE SE
ESTABLECEN SNMP
flag /00-
Allows firmware Updates (by default all updates are disabled)
ex.:
-
http://192.168.100.1/00- - To restore defaults : reboot the cablemodem
flag /01-
(Stealth mode)
ex.:
-
http://192.168.100.1/01- - To restore defaults : reboot the cablemodem
/04- set config name to NVRam
ex.:
-
http://192.168.100.1/04-blah.cm - To go back to ISP defaults :
http://192.168.100.1/04- (check the config name that was set, on the fibercoax tab)
/05- boot from Stand alone kernel
ex.:
-
http://192.168.100.1/05- We left this feature for advanced users that wants to change FW's temporarily (an example would be going to docsis 1.1 FW and back to 1.0) and also to prove that serial cables isnt needed to do this. Rebooting will restore our FW from flash
/06- Sets snmp port to defaults /24- Set memory location to dump (uppercase alpha)
ex.:
-
http://192.168.100.1/24-80589680 (check the dump results on the fibercoax tab)
"07-" followed by UPPER case 6-byte hex will change HFC MAC address
(
http://192.168.100.1/07-0123456789AB - stands for 01:23:45:67:89:AB)
flag "08-" followed by 24 digits will change serial number
(
http://192.168.100.1/08-123456789012345678901234)
BIEN PUES ABRO MI PAGINA EN 192.168.100.1/06-161 PUERTO DEFAULT DEL SBRIDERENTONSES DOY EN RESTART Y ALA HORA DE QUE ME SALE WAITING FOR CM, MANDO EL PUERTO DEFAULT COMO SI FUERA A CAMBEAR LA MAC PERO MANDANDO EL PUERTO PREDETERMINADO Y ZAZ COJE Y TE DICE FTP DISCONECT...........
Y FELICIDADES A SUBIR TU HACKWARE
TUBE ESTE PREOBLEMA Y PARA AKELLOS QUE SE PRESENTEN LO MISMO SE EVITARAN EL PUÑO DE HORAS QUE ME AVENTE YO SUERTE....!!