Autor
La intención es que se enciendan cada 2 o 3 minutos o algo así y no estén consumiendo energía constantemente, a su vez las conectaría a unos condensadores para que no se apagaran al instante y durara un poco mas la iluminación
Funcionan a 12v
He visto que puedo comprar estos módulos ya hechos y programables, la pregunta es si me servirían,el resto lo soldaria a una placa aparte incluso le pondria un interruptor o un boton de apagado
https://www.ebay.com/itm/124195820732
Funciones
Time delay range: T1 and T2 between 0.1 seconds to 99 hours adjustable.
P1(delay turn off): when power on, the relay on, delay T1, and the relay off. Give IN a low level, repeat the above function.
P2(delay turn on): when power on, the relay disconnected, delay T1, and the relay on. Give IN a low level, repeat the above function.
P3(Timing cycle on-off): when power on, the relay on, delay T1, and the relay off, delay T2, the relay on, and then repeat the above condition, cycle times can be adjusted 1-99 times or infinite loop.
P4(Timing cycle off-on): when power on, the relay disconnected, delay T1, and the relay on, delay T2, the relay off, and then repeat the above condition, cycle times can be adjusted 1-99 times or infinite loop.
P5(trigger delay turn off): when power on, the relay disconnected, triggered the relay on, delay T1, and the relay off. Give IN a low level, repeat the above function.
P6(trigger delay turn on): when power on, the relay disconnected, triggered the relay disconnected, delay T1, and the relay on. Give IN a low level, repeat the above function.
P7(trigger cycle on-off): when power on, the relay disconnected, triggered the relay on, delay T1, and the relay off, delay T2, and the relay on, and then repeat the above condition, cycle times can be adjusted 1-99 times or infinite loop.
P8(trigger circle off-on): when power on, the relay disconnected, triggered the relay disconnected, delay T1, and the relay on, delay T2, and the relay off, and then repeat the above condition, cycle times can be adjusted 1-99 times or infinite loop.
Parametros
1. working voltage: DC 12V
2. Load Power: DC 0~30V 10A / AC 0~220V 10A.
3. Static current: 15mA
4. Working current: 30mA
5. Service life: 100 thousand times;
6. Working temperature: -40~85℃;
7. Size: 65mm*28mm*18mm
Lo siento por no tener tiempo y traducir el ingles, a ver si alguien me puede aconsejar,gracias
En línea
