elhacker.net cabecera Bienvenido(a), Visitante. Por favor Ingresar o Registrarse
¿Perdiste tu email de activación?.

 

 


Tema destacado: Entrar al Canal Oficial Telegram de elhacker.net


+  Foro de elhacker.net
|-+  Seguridad Informática
| |-+  Hacking Wireless
| | |-+  Wireless en Linux
| | | |-+  pyrit-cuda problemas
0 Usuarios y 1 Visitante están viendo este tema.
Páginas: [1] Ir Abajo Respuesta Imprimir
Autor Tema: pyrit-cuda problemas  (Leído 5,467 veces)
lenin1818

Desconectado Desconectado

Mensajes: 77



Ver Perfil
pyrit-cuda problemas
« en: 29 Agosto 2010, 22:31 pm »

Leei el tutorial de pyrit-cuda para wpa y me surgieron unos problemas, formule mis dudas alla pero pss nadie me ha contestado espero y alguien me pueda responder
Lo que pasa esque instalo pyryt como esta en el tuto de festor y al hacer el benchmark solo me da la lectura de mis procesadores y no lo de mi tarjeta grafica es un n'vidia geoforce 9300m,

despues descargue back track 4 de otra pagina segun con todo ya actualizado y pasa lo mismo, y no puedo bajar los archivos deb dejador por festor por k me marca error no se ak se deba,

por ahi leei algo de k tengo k tener el kernel mas actualizado pero pss igual no ce como.
 y por ultimo no se si pueda usar pyrit digamos en wifiway no ce si haya repositorios para utilizarlos en wifiway o k puedo hacer ayuda si cometo una infraccion perdon pero pss ya tengo tiempo esperando k me respóndan y nada y pss di buscar y no encontre nada de pyrit mas k lo de festor sale saludos >:( >:( >:(

En línea

luinuz

Desconectado Desconectado

Mensajes: 239


Ver Perfil WWW
Re: pyrit-cuda problemas
« Respuesta #1 en: 30 Agosto 2010, 01:24 am »

Seguramente el error no se deba al kernel. De todas formas para revisarlo; Que kernel tienes? Has mirado el log /var/log/messages en busca de errores?

Estas seguro que la geforce 9300M tiene soporte CUDA? Yo personalmente se que  la 9300 y la 9300M G si lo tienen.

Estas usando la ultima version de pyrit-cuda?

Si realmente no puedes instalar los .deb por que no bajas las fuentes y lo compilas tu mismo?

Saludos.

P.D. Posiblemente no te repondieron antes por que no das informacion sobre nada.
En línea

lenin1818

Desconectado Desconectado

Mensajes: 77



Ver Perfil
Re: pyrit-cuda problemas
« Respuesta #2 en: 30 Agosto 2010, 04:38 am »

entre ala pagina oficial de nvidia y mire que si es cmpatible descargue los controladores que en ella ahi supongo que son los mas actualizados el kernel del backtraack 4 es 2.6.30.9,
Lo de mensajes de errores eso no te entendi muy bien?
y compilar ups no ce compilar pero pss de todas maneras gracias creo que ya se entonces por donde irle
En línea

luinuz

Desconectado Desconectado

Mensajes: 239


Ver Perfil WWW
Re: pyrit-cuda problemas
« Respuesta #3 en: 2 Septiembre 2010, 01:08 am »

El kernel 2.6.30.9 es muy antiguo.

Para ver los mensajes del kernel haz "dmesg" o "cat /var/log/messages".

En línea

lenin1818

Desconectado Desconectado

Mensajes: 77



Ver Perfil
Re: pyrit-cuda problemas
« Respuesta #4 en: 3 Septiembre 2010, 19:20 pm »

mira esto es lo que ago tu dime que ago mal:
ubuntu@ubuntu:~$ sudo gedit /etc/apt/sources.list

despues de esto se me abre una ventana y aqui pego los repos asi:

deb cdrom:[Ubuntu 9.04 _Jaunty Jackalope_ - Release i386 (20090420.1)]/ jaunty main restricted
deb http://archive.ubuntu.com/ubuntu jaunty main restricted
deb-src http://archive.ubuntu.com/ubuntu jaunty main restricted

deb http://security.ubuntu.com/ubuntu jaunty-security main restricted
deb-src http://security.ubuntu.com/ubuntu jaunty-security main restricted

## Major bug fix updates produced after the final release of the
## distribution.
deb http://archive.ubuntu.com/ubuntu jaunty-updates main restricted
deb-src http://archive.ubuntu.com/ubuntu jaunty-updates main restricted

## Uncomment the following two lines to add software from the 'universe'
## repository.
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team. Also, please note that software in universe WILL NOT receive any
## review or updates from the Ubuntu security team.
# deb http://archive.ubuntu.com/ubuntu jaunty universe
# deb-src http://archive.ubuntu.com/ubuntu jaunty universe
# deb http://archive.ubuntu.com/ubuntu jaunty-updates universe
# deb-src http://archive.ubuntu.com/ubuntu jaunty-updates universe
# deb http://security.ubuntu.com/ubuntu jaunty-security universe
# deb-src http://security.ubuntu.com/ubuntu jaunty-security universe

## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
# deb http://archive.ubuntu.com/ubuntu jaunty multiverse
# deb-src http://archive.ubuntu.com/ubuntu jaunty multiverse
# deb http://archive.ubuntu.com/ubuntu jaunty-updates multiverse
# deb-src http://archive.ubuntu.com/ubuntu jaunty-updates multiverse
# deb http://security.ubuntu.com/ubuntu jaunty-security multiverse
# deb-src http://security.ubuntu.com/ubuntu jaunty-security multiverse
# deb http://ppa.launchpad.net/dev-games/ppa/ubuntu jaunty main
# deb http://ppa.launchpad.net/festor/hack-tools/ubuntu karmic main
# deb-src http://ppa.launchpad.net/festor/hack-tools/ubuntu karmic main

ya despues de esto guardo eso y ago esto:
ubuntu@ubuntu:~$ sudo aptitude update
Ign cdrom://Ubuntu 9.04 _Jaunty Jackalope_ - Release i386 (20090420.1) jaunty/main Translation-en_US
Ign cdrom://Ubuntu 9.04 _Jaunty Jackalope_ - Release i386 (20090420.1) jaunty/restricted Translation-en_US
Hit http://security.ubuntu.com jaunty-security Release.gpg                     
Ign http://security.ubuntu.com jaunty-security/main Translation-en_US
Hit http://archive.ubuntu.com jaunty Release.gpg
Ign http://archive.ubuntu.com jaunty/main Translation-en_US
Ign http://security.ubuntu.com jaunty-security/restricted Translation-en_US
Hit http://security.ubuntu.com jaunty-security Release
Ign http://archive.ubuntu.com jaunty/restricted Translation-en_US
Hit http://archive.ubuntu.com jaunty-updates Release.gpg
Ign http://archive.ubuntu.com jaunty-updates/main Translation-en_US
Ign http://archive.ubuntu.com jaunty-updates/restricted Translation-en_US
Hit http://archive.ubuntu.com jaunty Release   
Hit http://security.ubuntu.com jaunty-security/main Packages       
Hit http://archive.ubuntu.com jaunty-updates Release
Hit http://security.ubuntu.com jaunty-security/restricted Packages 
Hit http://security.ubuntu.com jaunty-security/main Sources
Hit http://security.ubuntu.com jaunty-security/restricted Sources
Hit http://archive.ubuntu.com jaunty/main Packages
Hit http://archive.ubuntu.com jaunty/restricted Packages
Hit http://archive.ubuntu.com jaunty/main Sources
Hit http://archive.ubuntu.com jaunty/restricted Sources
Hit http://archive.ubuntu.com jaunty-updates/main Packages
Hit http://archive.ubuntu.com jaunty-updates/restricted Packages
Hit http://archive.ubuntu.com jaunty-updates/main Sources
Hit http://archive.ubuntu.com jaunty-updates/restricted Sources
Reading package lists... Done
luego procedo a instalar :
ubuntu@ubuntu:~$ sudo aptitude install pyrit
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Reading extended state information     
Initializing package states... Done
Couldn't find any package whose name or description matched "pyrit"
Couldn't find any package whose name or description matched "pyrit"
No packages will be installed, upgraded, or removed.
0 packages upgraded, 0 newly installed, 0 to remove and 323 not upgraded.
Need to get 0B of archives. After unpacking 0B will be used.
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Reading extended state information     
Initializing package states... Done

CREO QUE ME DICE QUE NO ENCUNTRA EL ARCHIVO DE PYRIT O ALGO ASI Y LOS MISMO CON ESTO:

ubuntu@ubuntu:~$ sudo aptitude install pyrit-cuda
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Reading extended state information     
Initializing package states... Done
Couldn't find any package whose name or description matched "pyrit-cuda"
Couldn't find any package whose name or description matched "pyrit-cuda"
No packages will be installed, upgraded, or removed.
0 packages upgraded, 0 newly installed, 0 to remove and 323 not upgraded.
Need to get 0B of archives. After unpacking 0B will be used.
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Reading extended state information     
Initializing package states... Done

LUEGO AGO ESTO
ubuntu@ubuntu:~$ pyrit benchmark
bash: pyrit: command not found



En línea

lenin1818

Desconectado Desconectado

Mensajes: 77



Ver Perfil
Re: pyrit-cuda problemas
« Respuesta #5 en: 3 Septiembre 2010, 19:25 pm »

y con lo que tu me pusiste para ver los errores sale todo esto que no entiendo nada:
[    1.415052] pci_express 0000:00:1c.0:pcie03: allocate port service
[    1.415124] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    1.415174] pcieport-driver 0000:00:1c.1: found MSI capability
[    1.415208] pcieport-driver 0000:00:1c.1: irq 2301 for MSI/MSI-X
[    1.415224] pci_express 0000:00:1c.1:pcie00: allocate port service
[    1.415234] pci_express 0000:00:1c.1:pcie02: allocate port service
[    1.415245] pci_express 0000:00:1c.1:pcie03: allocate port service
[    1.415319] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[    1.415369] pcieport-driver 0000:00:1c.5: found MSI capability
[    1.415402] pcieport-driver 0000:00:1c.5: irq 2300 for MSI/MSI-X
[    1.415418] pci_express 0000:00:1c.5:pcie00: allocate port service
[    1.415429] pci_express 0000:00:1c.5:pcie02: allocate port service
[    1.415439] pci_express 0000:00:1c.5:pcie03: allocate port service
[    1.415518] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.415657] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.416502] ACPI: AC Adapter [AC] (on-line)
[    1.429843] ACPI: Battery Slot [BAT0] (battery present)
[    1.429914] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.429916] ACPI: Power Button (FF) [PWRF]
[    1.429954] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    1.429963] ACPI: Sleep Button (CM) [SLPB]
[    1.430000] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    1.430009] ACPI: Power Button (CM) [PWRB]
[    1.430046] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[    1.431266] ACPI: Lid Switch [LID0]
[    1.431535] fan PNP0C0B:00: registered as cooling_device0
[    1.431540] ACPI: Fan [FAN] (on)
[    1.431738] ACPI: Invalid PBLK length [8]
[    1.432262] ACPI: SSDT BDE76C18, 0265 (r1  PmRef  Cpu0Ist     3000 INTL 20051117)
[    1.432730] ACPI: SSDT BDE74618, 05B3 (r1  PmRef  Cpu0Cst     3001 INTL 20051117)
[    1.433218] Monitor-Mwait will be used to enter C-1 state
[    1.433221] Monitor-Mwait will be used to enter C-2 state
[    1.433223] Monitor-Mwait will be used to enter C-3 state
[    1.433235] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    1.433251] processor ACPI_CPU:00: registered as cooling_device1
[    1.433264] ACPI: Invalid PBLK length [8]
[    1.433762] ACPI: SSDT BDE75E18, 01CF (r1  PmRef    ApIst     3000 INTL 20051117)
[    1.434240] ACPI: SSDT BDE76F18, 008D (r1  PmRef    ApCst     3000 INTL 20051117)
[    1.434821] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    1.434838] processor ACPI_CPU:01: registered as cooling_device2
[    1.439047] thermal LNXTHERM:01: registered as thermal_zone0
[    1.440051] ACPI: Thermal Zone [TZ0] (61 C)
[    1.441363] thermal LNXTHERM:02: registered as thermal_zone1
[    1.442731] ACPI: Thermal Zone [TZ1] (61 C)
[    1.442780] isapnp: Scanning for PnP cards...
[    1.798496] isapnp: No Plug & Play device found
[    1.808713] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.809628] brd: module loaded
[    1.809905] loop: module loaded
[    1.809959] Fixed MDIO Bus: probed
[    1.809963] PPP generic driver version 2.4.2
[    1.810013] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    1.810040] Driver 'sd' needs updating - please use bus_type methods
[    1.810048] Driver 'sr' needs updating - please use bus_type methods
[    1.810083] ahci 0000:00:1f.2: version 3.0
[    1.810097] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.810133] ahci 0000:00:1f.2: irq 2299 for MSI/MSI-X
[    1.810218] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    1.810221] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems
[    1.810226] ahci 0000:00:1f.2: setting latency timer to 64
[    1.810484] scsi0 : ahci
[    1.810559] scsi1 : ahci
[    1.810609] scsi2 : ahci
[    1.810658] scsi3 : ahci
[    1.810708] scsi4 : ahci
[    1.810759] scsi5 : ahci
[    1.810860] ata1: SATA max UDMA/133 abar m2048@0xd9304000 port 0xd9304100 irq 2299
[    1.810864] ata2: SATA max UDMA/133 abar m2048@0xd9304000 port 0xd9304180 irq 2299
[    1.810865] ata3: DUMMY
[    1.810867] ata4: DUMMY
[    1.810869] ata5: SATA max UDMA/133 abar m2048@0xd9304000 port 0xd9304300 irq 2299
[    1.810872] ata6: SATA max UDMA/133 abar m2048@0xd9304000 port 0xd9304380 irq 2299
[    2.404019] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.406136] ata1.00: ATA-8: WDC WD2500BEVT-60ZCT1, 13.01A13, max UDMA/100
[    2.406138] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.409367] ata1.00: configured for UDMA/100
[    2.908014] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.911790] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U20N, HC09, max UDMA/100
[    2.916837] ata2.00: configured for UDMA/100
[    3.364016] ata5: SATA link down (SStatus 0 SControl 300)
[    3.700015] ata6: SATA link down (SStatus 0 SControl 300)
[    3.716091] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BEVT-6 13.0 PQ: 0 ANSI: 5
[    3.716177] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[    3.716191] sd 0:0:0:0: [sda] Write Protect is off
[    3.716193] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.716215] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.716271] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[    3.716283] sd 0:0:0:0: [sda] Write Protect is off
[    3.716286] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.716307] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.716310]  sda: sda1 sda2
[    3.768987] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.769029] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.772030] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-U20N  HC09 PQ: 0 ANSI: 5
[    4.104727] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.104730] Uniform CD-ROM driver Revision: 3.20
[    4.104805] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.104835] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    4.105432] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.105450] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    4.105463] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    4.105467] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    4.105519] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    4.109442] ehci_hcd 0000:00:1a.7: debug port 1
[    4.109448] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    4.109462] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd9304c00
[    4.124008] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    4.124062] usb usb1: configuration #1 chosen from 1 choice
[    4.124085] hub 1-0:1.0: USB hub found
[    4.124092] hub 1-0:1.0: 4 ports detected
[    4.124186] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    4.124201] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    4.124204] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    4.124239] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    4.128150] ehci_hcd 0000:00:1d.7: debug port 1
[    4.128156] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    4.128168] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd9304800
[    4.144007] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    4.144070] usb usb2: configuration #1 chosen from 1 choice
[    4.144092] hub 2-0:1.0: USB hub found
[    4.144097] hub 2-0:1.0: 8 ports detected
[    4.144187] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.144200] uhci_hcd: USB Universal Host Controller Interface driver
[    4.144218] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.144224] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    4.144227] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    4.144265] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    4.144298] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000060e0
[    4.144364] usb usb3: configuration #1 chosen from 1 choice
[    4.144386] hub 3-0:1.0: USB hub found
[    4.144392] hub 3-0:1.0: 2 ports detected
[    4.144469] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    4.144475] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    4.144479] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    4.144514] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    4.144547] uhci_hcd 0000:00:1a.1: irq 22, io base 0x000060c0
[    4.144612] usb usb4: configuration #1 chosen from 1 choice
[    4.144635] hub 4-0:1.0: USB hub found
[    4.144641] hub 4-0:1.0: 2 ports detected
[    4.144714] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    4.144720] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    4.144724] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    4.144762] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    4.144788] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000060a0
[    4.144852] usb usb5: configuration #1 chosen from 1 choice
[    4.144873] hub 5-0:1.0: USB hub found
[    4.144879] hub 5-0:1.0: 2 ports detected
[    4.144953] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    4.144959] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    4.144962] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    4.145001] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    4.145027] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006080
[    4.145091] usb usb6: configuration #1 chosen from 1 choice
[    4.145112] hub 6-0:1.0: USB hub found
[    4.145118] hub 6-0:1.0: 2 ports detected
[    4.145190] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    4.145196] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    4.145199] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    4.145233] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    4.145260] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00006060
[    4.145323] usb usb7: configuration #1 chosen from 1 choice
[    4.145347] hub 7-0:1.0: USB hub found
[    4.145353] hub 7-0:1.0: 2 ports detected
[    4.145427] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    4.145433] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    4.145436] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    4.145471] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[    4.145505] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00006040
[    4.145570] usb usb8: configuration #1 chosen from 1 choice
[    4.145591] hub 8-0:1.0: USB hub found
[    4.145597] hub 8-0:1.0: 2 ports detected
[    4.145711] usbcore: registered new interface driver libusual
[    4.145738] usbcore: registered new interface driver usbserial
[    4.145747] USB Serial support registered for generic
[    4.145762] usbcore: registered new interface driver usbserial_generic
[    4.145763] usbserial: USB Serial Driver core
[    4.145804] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    4.149864] i8042.c: Detected active multiplexing controller, rev 1.1.
[    4.152455] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.152460] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    4.152462] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    4.152464] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    4.152466] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    4.156532] mice: PS/2 mouse device common for all mice
[    4.156721] rtc_cmos 00:03: RTC can wake from S4
[    4.156752] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    4.156783] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    4.156834] device-mapper: uevent: version 1.0.3
[    4.156907] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[    4.156971] device-mapper: multipath: version 1.0.5 loaded
[    4.156974] device-mapper: multipath round-robin: version 1.0.0 loaded
[    4.157039] EISA: Probing bus 0 at eisa.0
[    4.157045] Cannot allocate resource for EISA slot 1
[    4.157047] Cannot allocate resource for EISA slot 2
[    4.157049] Cannot allocate resource for EISA slot 3
[    4.157051] Cannot allocate resource for EISA slot 4
[    4.157053] Cannot allocate resource for EISA slot 5
[    4.157055] Cannot allocate resource for EISA slot 6
[    4.157065] EISA: Detected 0 cards.
[    4.157164] cpuidle: using governor ladder
[    4.157267] cpuidle: using governor menu
[    4.157717] TCP cubic registered
[    4.157801] NET: Registered protocol family 10
[    4.158183] lo: Disabled Privacy Extensions
[    4.158479] NET: Registered protocol family 17
[    4.158493] Bluetooth: L2CAP ver 2.11
[    4.158495] Bluetooth: L2CAP socket layer initialized
[    4.158497] Bluetooth: SCO (Voice Link) ver 0.6
[    4.158499] Bluetooth: SCO socket layer initialized
[    4.158528] Marking TSC unstable due to TSC halts in idle
[    4.158536] Bluetooth: RFCOMM socket layer initialized
[    4.158540] Bluetooth: RFCOMM TTY layer initialized
[    4.158542] Bluetooth: RFCOMM ver 1.10
[    4.159053] Using IPI No-Shortcut mode
[    4.159115] registered taskstats version 1
[    4.159221]   Magic number: 10:643:781
[    4.159307] rtc_cmos 00:03: setting system clock to 2010-09-03 11:46:06 UTC (1283514366)
[    4.159309] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    4.159311] EDD information not available.
[    4.159568] Freeing unused kernel memory: 532k freed
[    4.159695] Write protecting the kernel text: 4128k
[    4.159748] Write protecting the kernel read-only data: 1532k
[    4.192685] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    4.363651] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    4.363671] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.363707] r8169 0000:02:00.0: setting latency timer to 64
[    4.363873] r8169 0000:02:00.0: irq 2298 for MSI/MSI-X
[    4.364463] eth0: RTL8168c/8111c at 0xf7c6a000, 00:22:64:71:f8:7a, XID 3c4000c0 IRQ 2298
[    4.664021] usb 2-2: new high speed USB device using ehci_hcd and address 2
[    4.906555] usb 2-2: configuration #1 chosen from 1 choice
[    4.919783] Initializing USB Mass Storage driver...
[    4.936034] scsi6 : SCSI emulation for USB Mass Storage devices
[    4.936649] usbcore: registered new interface driver usb-storage
[    4.936652] USB Mass Storage support registered.
[    4.936720] usb-storage: device found at 2
[    4.936722] usb-storage: waiting for device to settle before scanning
[    5.140558] usb 2-4: new high speed USB device using ehci_hcd and address 4
[    5.410288] usb 2-4: configuration #1 chosen from 1 choice
[    5.652057] usb 3-1: new full speed USB device using uhci_hcd and address 2
[    5.815171] usb 3-1: configuration #1 chosen from 1 choice
[    6.000513] Clocksource tsc unstable (delta = -226843639 ns)
[    6.056075] usb 3-2: new full speed USB device using uhci_hcd and address 3
[    6.229031] usb 3-2: configuration #1 chosen from 1 choice
[    6.468062] usb 6-1: new full speed USB device using uhci_hcd and address 2
[    6.640399] usb 6-1: configuration #1 chosen from 1 choice
[    6.645711] scsi7 : SCSI emulation for USB Mass Storage devices
[    6.645805] usb-storage: device found at 2
[    6.645807] usb-storage: waiting for device to settle before scanning
[    9.936302] usb-storage: device scan complete
[    9.974898] scsi 6:0:0:0: Direct-Access     Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
[    9.976597] sd 6:0:0:0: [sdb] 3905407 512-byte hardware sectors: (1.99 GB/1.86 GiB)
[    9.977112] sd 6:0:0:0: [sdb] Write Protect is off
[    9.977116] sd 6:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[    9.977120] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    9.978759] sd 6:0:0:0: [sdb] 3905407 512-byte hardware sectors: (1.99 GB/1.86 GiB)
[    9.979236] sd 6:0:0:0: [sdb] Write Protect is off
[    9.979240] sd 6:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[    9.979244] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    9.979249]  sdb: sdb1
[    9.991303] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    9.991359] sd 6:0:0:0: Attached scsi generic sg2 type 0
[   11.646205] usb-storage: device scan complete
[   11.649115] scsi 7:0:0:0: Direct-Access     Motorola Phone                 PQ: 0 ANSI: 4
[   11.655137] sd 7:0:0:0: [sdc] 3841536 512-byte hardware sectors: (1.96 GB/1.83 GiB)
[   11.658109] sd 7:0:0:0: [sdc] Write Protect is off
[   11.658113] sd 7:0:0:0: [sdc] Mode Sense: 10 00 00 00
[   11.658117] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[   11.663114] sd 7:0:0:0: [sdc] 3841536 512-byte hardware sectors: (1.96 GB/1.83 GiB)
[   11.666132] sd 7:0:0:0: [sdc] Write Protect is off
[   11.666136] sd 7:0:0:0: [sdc] Mode Sense: 10 00 00 00
[   11.666139] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[   11.666144]  sdc: sdc1
[   11.682150] sdc: p1 size 3841911 limited to end of disk
[   11.682305] sd 7:0:0:0: [sdc] Attached SCSI disk
[   11.682376] sd 7:0:0:0: Attached scsi generic sg3 type 0
[   11.908717] aufs 20080922
[   13.773564] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[   33.688660] udev: starting version 141
[   33.814585] Linux agpgart interface v0.103
[   33.817441] Bluetooth: Generic Bluetooth USB driver ver 0.3
[   33.817551] usbcore: registered new interface driver btusb
[   33.833776] acpi device:03: registered as cooling_device3
[   33.834032] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input6
[   33.843042] lis3lv02d: laptop model unknown, using default axes configuration
[   33.855540] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
[   33.860075] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   33.869108] lis3lv02d driver loaded.
[   33.912069] cfg80211: Calling CRDA to update world regulatory domain
[   33.913976] iTCO_vendor_support: vendor-support=0
[   33.958512] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[   33.958655] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[   33.958715] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   33.989548] leds-hp-disk driver loaded.
[   34.016444] input: PC Speaker as /devices/platform/pcspkr/input/input8
[   34.078055] Linux video capture interface: v2.00
[   34.095377] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[   34.095379] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[   34.095494] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   34.095524] iwlagn 0000:03:00.0: setting latency timer to 64
[   34.095628] iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[   34.118330] iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
[   34.118401] iwlagn 0000:03:00.0: irq 2297 for MSI/MSI-X
[   34.119260] phy0: Selected rate control algorithm 'iwl-agn-rs'
[   34.136138] uvcvideo: Found UVC 1.00 device HP Webcam (10f1:1a09)
[   34.137611] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input9
[   34.152661] usbcore: registered new interface driver uvcvideo
[   34.152684] USB Video Class driver (v0.1.0)
[   34.196890] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   34.196954] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   34.227774] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[   34.231187] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[   34.312941] cfg80211: World regulatory domain updated:
[   34.312945]    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   34.312947]    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   34.312949]    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   34.312952]    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   34.312954]    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   34.312956]    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   34.835313] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input11
[   34.857349] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input12
[   38.974196] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   38.974199] Bluetooth: BNEP filters: protocol multicast
[   38.993443] Bridge firewalling registered
[   40.540073] lp: driver loaded but no devices found
[   40.564556] ppdev: user-space parallel port driver
[   44.659618] r8169: eth0: link down
[   44.659801] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   44.660385] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-1.ucode
[   44.898982] Registered led device: iwl-phy0:radio
[   44.899007] Registered led device: iwl-phy0:assoc
[   44.899022] Registered led device: iwl-phy0:RX
[   44.899036] Registered led device: iwl-phy0:TX
[   45.025406] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   48.467481] CPU0 attaching NULL sched-domain.
[   48.467485] CPU1 attaching NULL sched-domain.
[   48.471974] CPU0 attaching sched-domain:
[   48.471978]  domain 0: span 0-1 level MC
[   48.471983]   groups: 0 1
[   48.471992] CPU1 attaching sched-domain:
[   48.471995]  domain 0: span 0-1 level MC
[   48.471999]   groups: 1 0
[   81.095762] wlan0: authenticate with AP 00:26:44:29:b0:9b
[   81.100515] wlan0: authenticated
[   81.100521] wlan0: associate with AP 00:26:44:29:b0:9b
[   81.103078] wlan0: RX AssocResp from 00:26:44:29:b0:9b (capab=0x411 status=0 aid=1)
[   81.103082] wlan0: associated
[   81.104509] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   91.928043] wlan0: no IPv6 routers present
[  422.760141] usb 6-1: USB disconnect, address 2
[  496.156540] CE: hpet increasing min_delta_ns to 15000 nsec
[  623.208540] CE: hpet increasing min_delta_ns to 22500 nsec
[  747.935885] wlan0: deauthenticated
[  748.932054] wlan0: direct probe to AP 00:26:44:29:b0:9b try 1
[  749.132550] wlan0: direct probe to AP 00:26:44:29:b0:9b try 2
[  749.332537] wlan0: direct probe to AP 00:26:44:29:b0:9b try 3
[  749.532538] wlan0: direct probe to AP 00:26:44:29:b0:9b timed out
[  751.627286] wlan0: direct probe to AP 00:26:44:29:b0:9b try 1
[  751.627466] iwlagn: index 0 not used in uCode key table.
[  751.824198] wlan0: direct probe to AP 00:26:44:29:b0:9b try 2
[  752.024205] wlan0: direct probe to AP 00:26:44:29:b0:9b try 3
[  752.224169] wlan0: direct probe to AP 00:26:44:29:b0:9b timed out
[  761.639339] wlan0: direct probe to AP 00:26:44:29:b0:9b try 1
[  761.644572] iwlagn: index 0 not used in uCode key table.
[  761.836082] wlan0: direct probe to AP 00:26:44:29:b0:9b try 2
[  762.036166] wlan0: direct probe to AP 00:26:44:29:b0:9b try 3
[  762.236086] wlan0: direct probe to AP 00:26:44:29:b0:9b timed out
[  763.456085] iwlagn: index 0 not used in uCode key table.
[  763.464877] wlan0: direct probe to AP 00:26:44:29:b0:9b try 1
[  763.664178] wlan0: direct probe to AP 00:26:44:29:b0:9b try 2
[  763.864145] wlan0: direct probe to AP 00:26:44:29:b0:9b try 3
[  764.064589] wlan0: direct probe to AP 00:26:44:29:b0:9b timed out
[  773.476361] wlan0: direct probe to AP 00:26:44:29:b0:9b try 1
[  773.480588] iwlagn: index 0 not used in uCode key table.
[  773.676589] wlan0: direct probe to AP 00:26:44:29:b0:9b try 2
[  773.876598] wlan0: direct probe to AP 00:26:44:29:b0:9b try 3
[  774.076590] wlan0: direct probe to AP 00:26:44:29:b0:9b timed out
[  783.486417] wlan0: direct probe to AP 00:26:44:29:b0:9b try 1
[  783.486873] wlan0: direct probe to AP 00:26:44:29:b0:9b try 1
[  783.492056] iwlagn: index 0 not used in uCode key table.
[  783.684129] wlan0: direct probe to AP 00:26:44:29:b0:9b try 2
[  783.884173] wlan0: direct probe to AP 00:26:44:29:b0:9b try 3
[  784.084118] wlan0: direct probe to AP 00:26:44:29:b0:9b timed out
[  793.498261] wlan0: direct probe to AP 00:26:44:29:b0:9b try 1
[  793.498688] wlan0: direct probe to AP 00:26:44:29:b0:9b try 1
[  793.500925] wlan0 direct probe responded
[  793.500933] wlan0: authenticate with AP 00:26:44:29:b0:9b
[  793.504552] iwlagn: index 0 not used in uCode key table.
[  793.505097] wlan0: authenticated
[  793.505104] wlan0: associate with AP 00:26:44:29:b0:9b
[  793.509538] wlan0: RX AssocResp from 00:26:44:29:b0:9b (capab=0x411 status=0 aid=1)
[  793.509544] wlan0: associated
[  842.895477] wlan0: disassociating by local choice (reason=3)
[  842.905591] iwlagn: index 0 not used in uCode key table.
[  844.965884] wlan0: direct probe to AP 00:26:44:29:b0:9b try 1
[  844.967539] wlan0: direct probe to AP 00:26:44:29:b0:9b try 1
[  844.970738] wlan0 direct probe responded
[  844.970748] wlan0: authenticate with AP 00:26:44:29:b0:9b
[  844.978044] wlan0: authenticated
[  844.978052] wlan0: associate with AP 00:26:44:29:b0:9b
[  844.980595] wlan0: RX ReassocResp from 00:26:44:29:b0:9b (capab=0x411 status=0 aid=1)
[  844.980601] wlan0: associated
[ 1043.278287] wlan0: deauthenticated
[ 1044.276189] wlan0: direct probe to AP 00:26:44:29:b0:9b try 1
[ 1044.476572] wlan0: direct probe to AP 00:26:44:29:b0:9b try 2
[ 1044.478667] wlan0 direct probe responded
[ 1044.478675] wlan0: authenticate with AP 00:26:44:29:b0:9b
[ 1044.481900] wlan0: authenticated
[ 1044.481909] wlan0: associate with AP 00:26:44:29:b0:9b
[ 1044.484496] wlan0: RX ReassocResp from 00:26:44:29:b0:9b (capab=0x411 status=0 aid=1)
[ 1044.484524] wlan0: associated
[ 1343.227563] wlan0: deauthenticated
[ 1344.224364] wlan0: direct probe to AP 00:26:44:29:b0:9b try 1
[ 1344.226482] wlan0 direct probe responded
[ 1344.226491] wlan0: authenticate with AP 00:26:44:29:b0:9b
[ 1344.228564] wlan0: authenticated
[ 1344.228573] wlan0: associate with AP 00:26:44:29:b0:9b
[ 1344.231957] wlan0: RX ReassocResp from 00:26:44:29:b0:9b (capab=0x411 status=0 aid=1)
[ 1344.231963] wlan0: associated
[ 1412.816593] wlan0: deauthenticated
[ 1413.816676] wlan0: direct probe to AP 00:26:44:29:b0:9b try 1
[ 1414.016126] wlan0: direct probe to AP 00:26:44:29:b0:9b try 2
[ 1414.216175] wlan0: direct probe to AP 00:26:44:29:b0:9b try 3
[ 1414.416596] wlan0: direct probe to AP 00:26:44:29:b0:9b timed out
[ 1416.621960] wlan0: direct probe to AP 00:26:44:29:b0:9b try 1
[ 1416.624051] iwlagn: index 0 not used in uCode key table.
[ 1416.820195] wlan0: direct probe to AP 00:26:44:29:b0:9b try 2
[ 1417.020178] wlan0: direct probe to AP 00:26:44:29:b0:9b try 3
[ 1417.220707] wlan0: direct probe to AP 00:26:44:29:b0:9b timed out
[ 1426.631233] wlan0: direct probe to AP 00:26:44:29:b0:9b try 1
[ 1426.631670] wlan0: direct probe to AP 00:26:44:29:b0:9b try 1
[ 1426.632062] iwlagn: index 0 not used in uCode key table.
[ 1426.828702] wlan0: direct probe to AP 00:26:44:29:b0:9b try 2
[ 1427.028113] wlan0: direct probe to AP 00:26:44:29:b0:9b try 3
[ 1427.228035] wlan0: direct probe to AP 00:26:44:29:b0:9b timed out
[ 1428.456578] iwlagn: index 0 not used in uCode key table.
[ 1429.951037] wlan0: authenticate with AP 00:26:44:29:b0:9b
[ 1430.148066] wlan0: authenticate with AP 00:26:44:29:b0:9b
[ 1430.348542] wlan0: authenticate with AP 00:26:44:29:b0:9b
[ 1430.548561] wlan0: authentication with AP 00:26:44:29:b0:9b timed out
[ 1439.966136] wlan0: authenticate with AP 00:26:44:29:b0:9b
[ 1439.966179] wlan0 direct probe responded
[ 1439.966186] wlan0: authenticate with AP 00:26:44:29:b0:9b
[ 1439.969389] iwlagn: index 0 not used in uCode key table.
[ 1439.973841] wlan0: authenticated
[ 1439.973850] wlan0: associate with AP 00:26:44:29:b0:9b
[ 1439.983872] wlan0: RX AssocResp from 00:26:44:29:b0:9b (capab=0x411 status=0 aid=1)
[ 1439.983880] wlan0: associated
[ 1488.906300] wlan0: disassociating by local choice (reason=3)
[ 1488.928856] wlan0: authenticate with AP 00:26:44:29:b0:9b
[ 1488.931127] wlan0: authenticated
[ 1488.931134] wlan0: associate with AP 00:26:44:29:b0:9b
[ 1488.935265] wlan0: RX ReassocResp from 00:26:44:29:b0:9b (capab=0x411 status=0 aid=1)
[ 1488.935272] wlan0: associated
[ 1488.938158] iwlagn: index 0 not used in uCode key table.
En línea

lenin1818

Desconectado Desconectado

Mensajes: 77



Ver Perfil
Re: pyrit-cuda problemas
« Respuesta #6 en: 3 Septiembre 2010, 19:30 pm »

por cierto se me pasaba el back track ya lo deje y esto lo hice en ubuntu juanty 2.26.29
En línea

luinuz

Desconectado Desconectado

Mensajes: 239


Ver Perfil WWW
Re: pyrit-cuda problemas
« Respuesta #7 en: 3 Septiembre 2010, 23:01 pm »

Logicamente no te funciona porque no has instalado el programa pyrit-cuda, y no has podido instalarlo por que no esta en los repositorios. Ve a la web oficial del programa y descargate la ultima version, luego la instalas manualmente.

Yo no uso ubuntu asi que no te puedo indicar en que repositorio esta el paquete.

Con respecto a la version del kernel a usar yo te recomiendo la 2.6.32 o superior.

Saludos.

En línea

lenin1818

Desconectado Desconectado

Mensajes: 77



Ver Perfil
Re: pyrit-cuda problemas
« Respuesta #8 en: 26 Septiembre 2010, 01:46 am »

bueno antes de tratar de instalara pyrit manualmente me encontre a 'PENTOO' ESTE YA TRAE INCLUIDO PYRIT y estos fueron los resultados:

pentoo ~# pyrit benchmark
/usr/lib64/python2.6/site-packager/scapy.py:102: DeprecationWarning: the sets module is deprecated
  from sets import set
pyrit 0.2.4 (c) 2008, 2009 Lukas lueg http://pyrit.googlecode.com
This code is distributed under the GNU General Public Licence v3

The ESSID-blobspace seems to be empty: you should create an ESSID...

Runnig benchmark for about 2 seconds....

Computed 657.57 PMKs/s total.
#1: 'CUDA-Device #1 'GeoForce 9300M gs'':466.4 PMKs/s(Occ.97.6%: RTT 3.1)
#2: 'CPU-Core( SSE2)': 206.7 PMKs/s (Occ. 97.9% RTT 4.5)

bueno asta aqui todo iba bien solo que me di cuenta que con backtrack me da valores mas altos sin tener instalado CUDA

root@bt:~# pyrit benchmark

Pyrit 0.2.5-dev (C) 2008, 2009 Lukas Lueg http://pyrit.googlecode.com
This code is distributed under the GNU General Public Licence v3

Conecting to stirage ... connected

Runnin benchmark for about 0 seconds.../

computed 1035.12 PMKs/s total
#1: 'CPU-Core (SSE2)': 537.3 PMKs/S (Occ. 97.2% RTT 3.0)
#2: 'CPU-Core (SSE2)': 528.2 PMKs/s (Occ. 97.1% RTT 3.0)


Bueno aqui es donde esta mi duda aque se debe que con back track me de mas si no tiene cuda instalado y en pentoo me da menos, creo que en pento me marca un error de python pero no le entiendo aver si me ayudan aver de k trata.




Bueno despues procedi a instalar pyrit manualmente ya que lo anterior me dejo dudad instala python 2.6.6 y zlib bueno despues de instalar esas librerias instale pyrit pero ala ahora de instalar pyrit cuda me marca este error

root@bt:~/cpyrit-cuda-0.3.0#   python setup.py build
svn: '.' is not a working copy
running build
running build_ext
/bin/sh: /usr/local/cuda/bin/nvcc: cannot execute binary file
None
Failed to execute command '/usr/local/cuda/bin/nvcc -V'
Traceback (most recent call last):
  File "setup.py", line 157, in <module>
    setup(**setup_args)
  File "/usr/local/lib/python2.6/distutils/core.py", line 152, in setup
    dist.run_commands()
  File "/usr/local/lib/python2.6/distutils/dist.py", line 975, in run_commands
    self.run_command(cmd)
  File "/usr/local/lib/python2.6/distutils/dist.py", line 995, in run_command
    cmd_obj.run()
  File "/usr/local/lib/python2.6/distutils/command/build.py", line 134, in run
    self.run_command(cmd_name)
  File "/usr/local/lib/python2.6/distutils/cmd.py", line 333, in run_command
    self.distribution.run_command(command)
  File "/usr/local/lib/python2.6/distutils/dist.py", line 995, in run_command
    cmd_obj.run()
  File "setup.py", line 78, in run
    raise SystemError("Nvidia's CUDA-compiler 'nvcc' can't be " \
SystemError: Nvidia's CUDA-compiler 'nvcc' can't be found.
root@bt:~/cpyrit-cuda-0.3.0#



creo que se debe a no instalar bien el driver de cuda pero igual si me echan una mano o me explica se los agradeceria. Alo mejor me comi algun paso pero pss la verdad ya mi cabeza esta blokeada y ya no ce por donde.

queria subir unas imagenes pero no ce como hacerlo me salian muy chiquitas y por eso ya no las subi  :-[
« Última modificación: 26 Septiembre 2010, 08:01 am por lenin1818 » En línea

Páginas: [1] Ir Arriba Respuesta Imprimir 

Ir a:  

Mensajes similares
Asunto Iniciado por Respuestas Vistas Último mensaje
Compilar pyrit-cuda en ubuntu 10.10 « 1 2 3 »
Wireless en Linux
lavitz87 20 13,925 Último mensaje 4 Octubre 2011, 20:11 pm
por BiteAciD
Ayuda jrt+pyrit+cowpaty
Wireless en Linux
skyto 0 3,127 Último mensaje 22 Abril 2011, 02:54 am
por skyto
Instalar Pyrit y stream
GNU/Linux
Chachetoni 2 3,897 Último mensaje 1 Julio 2011, 02:19 am
por Chachetoni
Pyrit para Windows (WPA)
Wireless en Windows
HCK. 4 9,890 Último mensaje 4 Marzo 2013, 13:05 pm
por John_Ganissa
Tarea sumar dos matrices CUDA, MATLAB
Programación C/C++
MontSe821 1 1,540 Último mensaje 3 Abril 2020, 13:33 pm
por MAFUS
WAP2 - Aviso Legal - Powered by SMF 1.1.21 | SMF © 2006-2008, Simple Machines