#
# /etc/apache2/httpd.conf
#
# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs-2.2/> for detailed information about
# the directives.

# Based upon the default apache configuration file that ships with apache,
# which is based upon the NCSA server configuration files originally by Rob
# McCool. This file was knocked together by Peter Poeml <poeml+apache@suse.de>.

# If possible, avoid changes to this file. It does mainly contain Include
# statements and global settings that can/should be overridden in the
# configuration of your virtual hosts.

# Quickstart guide:
# http://www.opensuse.org/Apache_Howto_Quickstart


# Overview of include files, chronologically:
#
# httpd.conf
#  |
#  |-- uid.conf  . . . . . . . . . . . . . .  UserID/GroupID to run under
#  |-- server-tuning.conf  . . . . . . . . .  sizing of the server (how many processes to start, ...)
#  |-- sysconfig.d/loadmodule.conf . . . . . 

• load these modules

#  |-- listen.conf . . . . . . . . . . . . .  IP adresses / ports to listen on
#  |-- mod_log_config.conf . . . . . . . . .  define logging formats
#  |-- sysconfig.d/global.conf . . . . . . . 

• server-wide general settings

#  |-- mod_status.conf . . . . . . . . . . .  restrict access to mod_status (server monitoring)
#  |-- mod_info.conf . . . . . . . . . . . .  restrict access to mod_info
#  |-- mod_usertrack.conf  . . . . . . . . .  defaults for cookie-based user tracking
#  |-- mod_autoindex-defaults.conf . . . . .  defaults for displaying of server-generated directory listings
#  |-- mod_mime-defaults.conf  . . . . . . .  defaults for mod_mime configuration
#  |-- errors.conf . . . . . . . . . . . . .  customize error responses
#  |-- ssl-global.conf . . . . . . . . . . .  SSL conf that applies to default server _and all_ virtual hosts
#  |
#  |-- default-server.conf . . . . . . . . .  set up the default server that replies to non-virtual-host requests
#  |    |--mod_userdir.conf  . . . . . . . .  enable UserDir (if mod_userdir is loaded)
#  |    `--conf.d/apache2-manual?conf  . . .  add the docs ('?' = if installed)
#  |
#  |-- sysconfig.d/include.conf  . . . . . . 

• your include files

#  |                                             (for each file to be included here, put its name
#  |                                              into APACHE_INCLUDE_* in /etc/sysconfig/apache2)
#  |
#  `-- vhosts.d/ . . . . . . . . . . . . . .  for each virtual host, place one file here
#       `-- *.conf . . . . . . . . . . . . .     (*.conf is automatically included)
#
#
# Files marked

• are created from sysconfig upon server restart: instead of

# these files, you edit /etc/sysconfig/apache2



#  Filesystem layout:
#
# /etc/apache2/
#  |-- charset.conv  . . . . . . . . . . . .  for mod_auth_ldap
#  |-- conf.d/
#  |   |-- apache2-manual.conf . . . . . . .  conf that comes with apache2-doc
#  |   |-- mod_php4.conf . . . . . . . . . .  (example) conf that comes with apache2-mod_php4
#  |   `-- ... . . . . . . . . . . . . . . .  other configuration added by packages
#  |-- default-server.conf
#  |-- errors.conf
#  |-- httpd.conf  . . . . . . . . . . . . .  top level configuration file
#  |-- listen.conf
#  |-- magic
#  |-- mime.types -> ../mime.types
#  |-- mod_autoindex-defaults.conf
#  |-- mod_info.conf
#  |-- mod_log_config.conf
#  |-- mod_mime-defaults.conf
#  |-- mod_perl-startup.pl
#  |-- mod_status.conf
#  |-- mod_userdir.conf
#  |-- mod_usertrack.conf
#  |-- server-tuning.conf
#  |-- ssl-global.conf
#  |-- ssl.crl/  . . . . . . . . . . . . . .  PEM-encoded X.509 Certificate Revocation Lists (CRL)
#  |-- ssl.crt/  . . . . . . . . . . . . . .  PEM-encoded X.509 Certificates
#  |-- ssl.csr/  . . . . . . . . . . . . . .  PEM-encoded X.509 Certificate Signing Requests
#  |-- ssl.key/  . . . . . . . . . . . . . .  PEM-encoded RSA Private Keys
#  |-- ssl.prm/  . . . . . . . . . . . . . .  public DSA Parameter Files
#  |-- sysconfig.d/  . . . . . . . . . . . .  files that are created from /etc/sysconfig/apache2
#  |   |-- global.conf
#  |   |-- include.conf
#  |   `-- loadmodule.conf
#  |-- uid.conf
#  `-- vhosts.d/ . . . . . . . . . . . . . .  put your virtual host configuration (*.conf) here
#      |-- vhost-ssl.template
#      `-- vhost.template



### Global Environment ######################################################
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests.

# run under this user/group id
Include /etc/apache2/uid.conf

# - how many server processes to start (server pool regulation)
# - usage of KeepAlive
Include /etc/apache2/server-tuning.conf

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog /var/log/apache2/error_log

# generated from APACHE_MODULES in /etc/sysconfig/apache2
Include /etc/apache2/sysconfig.d/loadmodule.conf

# IP addresses / ports to listen on
Include /etc/apache2/listen.conf

# predefined logging formats
Include /etc/apache2/mod_log_config.conf

# generated from global settings in /etc/sysconfig/apache2
Include /etc/apache2/sysconfig.d/global.conf

# optional mod_status, mod_info
Include /etc/apache2/mod_status.conf
Include /etc/apache2/mod_info.conf

# optional cookie-based user tracking
# read the documentation before using it!!
Include /etc/apache2/mod_usertrack.conf

# configuration of server-generated directory listings
Include /etc/apache2/mod_autoindex-defaults.conf

# associate MIME types with filename extensions
TypesConfig /etc/apache2/mime.types
DefaultType text/plain
Include /etc/apache2/mod_mime-defaults.conf

# set up (customizable) error responses
Include /etc/apache2/errors.conf

# global (server-wide) SSL configuration, that is not specific to
# any virtual host
Include /etc/apache2/ssl-global.conf

# forbid access to the entire filesystem by default
<Directory />
    Options None
    AllowOverride None
    Order deny,allow
    Deny from all
</Directory>

# use .htaccess files for overriding,
AccessFileName .htaccess
# and never show them
<Files ~ "^\.ht">
    Order allow,deny
    Deny from all
</Files>

# List of resources to look for when the client requests a directory
DirectoryIndex index.html index.html.var

### 'Main' server configuration #############################################
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
Include /etc/apache2/default-server.conf


# Another way to include your own files
#
# The file below is generated from /etc/sysconfig/apache2,
# include arbitrary files as named in APACHE_CONF_INCLUDE_FILES and
# APACHE_CONF_INCLUDE_DIRS
Include /etc/apache2/sysconfig.d/include.conf


### Virtual server configuration ############################################
#
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs-2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.
#
Include /etc/apache2/vhosts.d/*.conf


# Note: instead of adding your own configuration here, consider
#       adding it in your own file (/etc/apache2/httpd.conf.local)
#       putting its name into APACHE_CONF_INCLUDE_FILES in
#       /etc/sysconfig/apache2 -- this will make system updates
#       easier

# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports. See also the <VirtualHost> directive.
#
# http://httpd.apache.org/docs-2.2/mod/mpm_common.html#listen
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#
# When we also provide SSL we have to listen to the
# standard HTTP port (see above) and to the HTTPS port
#
# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two
#       Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443"
#
#Listen 12.34.56.78:80
#Listen 80
#Listen 443



<IfDefine SSL>
    <IfDefine !NOSSL>
   <IfModule mod_ssl.c>

       Listen 443

   </IfModule>
    </IfDefine>
</IfDefine>


# Use name-based virtual hosting
#
# - on a specified address / port:
#
#NameVirtualHost 12.34.56.78:80
#
# - name-based virtual hosting:
#
#NameVirtualHost *:80
#
# - on all addresses and ports. This is your best bet when you are on
#   dynamically assigned IP addresses:
#
#NameVirtualHost *

Listen 80

#
# VirtualHost template
# Note: to use the template, rename it to /etc/apache2/vhost.d/yourvhost.conf.
# Files must have the .conf suffix to be loaded.
#
# See /usr/share/doc/packages/apache2/README.QUICKSTART for further hints
# about virtual hosts.
#
# NameVirtualHost statements can be added to /etc/apache2/listen.conf.
#
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#
<VirtualHost *:80>
    ServerAdmin webmaster@dummy-host.example.com
    ServerName dummy-host.example.com

    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot /srv/www/vhosts/dummy-host.example.com

    # if not specified, the global error log is used
    ErrorLog /var/log/apache2/dummy-host.example.com-error_log
    CustomLog /var/log/apache2/dummy-host.example.com-access_log combined

    # don't loose time with IP address lookups
    HostnameLookups Off

    # needed for named virtual hosts
    UseCanonicalName Off

    # configures the footer on server-generated documents
    ServerSignature On


    # Optionally, include *.conf files from /etc/apache2/conf.d/
    #
    # For example, to allow execution of PHP scripts:
    #
    # Include /etc/apache2/conf.d/mod_php4.conf
    #
    # or, to include all configuration snippets added by packages:
    # Include /etc/apache2/conf.d/*.conf


    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the realname directory are treated as applications and
    # run by the server when requested rather than as documents sent to the client.
    # The same rules about trailing "/" apply to ScriptAlias directives as to
    # Alias.
    #
    ScriptAlias /cgi-bin/ "/srv/www/vhosts/dummy-host.example.com/cgi-bin/"

    # "/srv/www/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have one, and where ScriptAlias points to.
    #
    <Directory "/srv/www/vhosts/dummy-host.example.com/cgi-bin">
   AllowOverride None
   Options +ExecCGI -Includes
   Order allow,deny
   Allow from all
    </Directory>


    # UserDir: The name of the directory that is appended onto a user's home
    # directory if a ~user request is received.
    #
    # To disable it, simply remove userdir from the list of modules in APACHE_MODULES
    # in /etc/sysconfig/apache2.
    #
    <IfModule mod_userdir.c>
   # Note that the name of the user directory ("public_html") cannot simply be
   # changed here, since it is a compile time setting. The apache package
   # would have to be rebuilt. You could work around by deleting
   # /usr/sbin/suexec, but then all scripts from the directories would be
   # executed with the UID of the webserver.
   UserDir public_html
   # The actual configuration of the directory is in
   # /etc/apache2/mod_userdir.conf.
   Include /etc/apache2/mod_userdir.conf
   # You can, however, change the ~ if you find it awkward, by mapping e.g.
   # http://www.example.com/users/karl-heinz/ --> /home/karl-heinz/public_html/
   #AliasMatch ^/users/([a-zA-Z0-9-_.]*)/?(.*) /home/$1/public_html/$2
    </IfModule>


    #
    # This should be changed to whatever you set DocumentRoot to.
    #
    <Directory "/srv/www/vhosts/dummy-host.example.com">
   
   #
   # Possible values for the Options directive are "None", "All",
   # or any combination of:
   #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
   #
   # Note that "MultiViews" must be named *explicitly* --- "Options All"
   # doesn't give it to you.
   #
   # The Options directive is both complicated and important.  Please see
   # http://httpd.apache.org/docs-2.2/mod/core.html#options
   # for more information.
   #
   Options Indexes FollowSymLinks
   
   #
   # AllowOverride controls what directives may be placed in .htaccess files.
   # It can be "All", "None", or any combination of the keywords:
   #   Options FileInfo AuthConfig Limit
   #
   AllowOverride None
   
   #
   # Controls who can get stuff from this server.
   #
   Order allow,deny
   Allow from all
   
    </Directory>

</VirtualHost>

Listen 192.168.1.20:80