elhacker.net cabecera Bienvenido(a), Visitante. Por favor Ingresar o Registrarse
¿Perdiste tu email de activación?.

 

 


Tema destacado: Recuerda que debes registrarte en el foro para poder participar (preguntar y responder)


  Mostrar Temas
Páginas: [1]
1  Comunicaciones / Redes / Configuración DNS en: 31 Marzo 2014, 02:00 am
Buenas a todos.

Espero que el tema esté creado en buen lugar.

Creo este tema porque tengo un par de problemas para configurar unos DNS.

Veréis. Tengo 3 servidores. Uno es un servidor exclusivamente de mail con un cliente postfix. Otro es sólamente para comprar dominios y apuntarlos al tercer servidor que es el que uso de almacenamiento para los distintos dominios.

La cuestión es que estoy configurando el servidor de mail para que se use por los dominios. Tengo configurada la entrada MX de las zonas DNS apuntando a la dirección del servidor pero no consigo hacer que funcione.

Cuando mando un mensaje desde mi correo de hotmail por ejemplo me llega automáticamente un mail de fallo. Y cuando intento enviar algo desde un mail de dominio simplemente no pasa nada. No me llega ningún mensaje ni al destinatario ni de error ni nada.

Esperaba que alguien pudiera echarme un cable. Llevo un par de días leyendo tutoriales sobre configuración de servidores de email, configuración de DNS, etcétera...

_________________________

Para extender un poco más la información:

El servidor de correo parece estar configurado correctamente y los dns apuntan bien. Pero mi intención es la siguiente:

Yo ya tengo usuarios de correo creados en otros dominios con el servidor de correo anterior. Me gustaría que éstos no los tuviera que volver a crear. Hay alguna forma de hacer que el servidor de mail nuevo adopte estas cuentas anteriormente creadas con otro servidor? Algo como migrar las cuentas?. Por cierto. Creo las cuentas desde un CPanel que me ofrece mi proveedor. Eso también servirá con el nuevo servidor? De momento puedo crear y borrar cuentas nuevas pero como no consigo enviar ni recivir mails casi que da igual...
2  Programación / Scripting / [Autoit][Español] NomadMemory en: 13 Diciembre 2013, 19:45 pm
Hola a todos!

Tengo un pequeño problema... Tengo el puntero estático de una dirección con todos sus offsets y estoy intentando obtener su valor pero... en Cheat Engine me muestra el valor correcto perfectamente, pero si intento buscar el valor con Autoit y la UDF NomadMemory no retorna la dirección correcta.

Código:
#include <NomadMemory.au3>

Global $pid, $memory

; vit
Global $base_address[1] = [Hex(0x007C7B4C)]
Global $offset1[2] = [0, Hex(0x2f8)]

If WinGetProcess("*proccess*") == -1 Then
    MsgBox(16, "Info.", "No se encuentra el proceso")
Else
    $pid = WinGetProcess("*proccess*")

    $memory = _MemoryOpen($pid)

    $final_add = "0x" & $base_address[0]

    $sp2_cur_vit = _MemoryRead($final_add, $memory, 'dword')
    MsgBox(64, "Result:", $final_add & " -> " & $sp2_cur_vit)

    _MemoryClose($memory)
    Exit
EndIf
Eso es un pequeño ejemplo.

Aquí dejo una imágen:


Como podéis ver, la dirección base es 0x007C7B4C, la cual en este caso apunta a 0x0F7C7008. Pero la función _MemoryRead() del NomadMemory me devuelve "1760660224" como el valor the la dirección base 0x007C7B4C. Esto está corriendo todo al mismo tiempo. El Cheat Engine, el script, y el proceso pero obtengo dos valores diferentes... No lo entiendo.

Este es mi NomadMemory.au3:
Código:
#include-once
#region _Memory
;=================================================================================================
; AutoIt Version:   3.1.127 (beta)
; Language:         English
; Platform:         All Windows
; Author:           Nomad
; Requirements:     These functions will only work with beta.
;=================================================================================================
; Credits:  wOuter - These functions are based on his original _Mem() functions.  But they are
;           easier to comprehend and more reliable.  These functions are in no way a direct copy
;           of his functions.  His functions only provided a foundation from which these evolved.
;=================================================================================================
;
; Functions:
;
;=================================================================================================
; Function:         _MemoryOpen($iv_Pid(, $iv_DesiredAccess(, $iv_InheritHandle)))
; Description:      Opens a process and enables all possible access rights to the process.  The
;                   Process ID of the process is used to specify which process to open.  You must
;                   call this function before calling _MemoryClose(), _MemoryRead(), or _MemoryWrite().
; Parameter(s):     $iv_Pid - The Process ID of the program you want to open.
;                   $iv_DesiredAccess - (optional) Set to 0x1F0FFF by default, which enables all
;                                       possible access rights to the process specified by the
;                                       Process ID.
;                   $if_InheritHandle - (optional) If this value is TRUE, all processes created by
;                                       this process will inherit the access handle.  Set to TRUE
;                                       (1) by default.  Set to 0 if you want it to be FALSE.
; Requirement(s):   A valid process ID.
; Return Value(s):  On Success - Returns an array containing the Dll handle and an open handle to
;                                the specified process.
;                   On Failure - Returns 0
;                   @Error - 0 = No error.
;                            1 = Invalid $iv_Pid.
;                            2 = Failed to open Kernel32.dll.
;                            3 = Failed to open the specified process.
; Author(s):        Nomad
; Note(s):
;=================================================================================================
Func _MemoryOpen($iv_Pid, $iv_DesiredAccess = 0x1F0FFF, $if_InheritHandle = 1)

    If Not ProcessExists($iv_Pid) Then
        SetError(1)
        Return 0
    EndIf

    Local $ah_Handle[2] = [DllOpen('kernel32.dll')]

    If @Error Then
        SetError(2)
        Return 0
    EndIf

    Local $av_OpenProcess = DllCall($ah_Handle[0], 'int', 'OpenProcess', 'int', $iv_DesiredAccess, 'int', $if_InheritHandle, 'int', $iv_Pid)

    If @Error Then
        DllClose($ah_Handle[0])
        SetError(3)
        Return 0
    EndIf

    $ah_Handle[1] = $av_OpenProcess[0]

    Return $ah_Handle

EndFunc

;=================================================================================================
; Function:         _MemoryRead($iv_Address, $ah_Handle(, $sv_Type))
; Description:      Reads the value located in the memory address specified.
; Parameter(s):     $iv_Address - The memory address you want to read from. It must be in hex
;                                 format (0x00000000).
;                   $ah_Handle - An array containing the Dll handle and the handle of the open
;                                process as returned by _MemoryOpen().
;                   $sv_Type - (optional) The "Type" of value you intend to read.  This is set to
;                               'dword'(32bit(4byte) signed integer) by default.  See the help file
;                               for DllStructCreate for all types.
;                               An example: If you want to read a word that is 15 characters in
;                               length, you would use 'char[16]'.
; Requirement(s):   The $ah_Handle returned from _MemoryOpen.
; Return Value(s):  On Success - Returns the value located at the specified address.
;                   On Failure - Returns 0
;                   @Error - 0 = No error.
;                            1 = Invalid $ah_Handle.
;                            2 = $sv_Type was not a string.
;                            3 = $sv_Type is an unknown data type.
;                            4 = Failed to allocate the memory needed for the DllStructure.
;                            5 = Error allocating memory for $sv_Type.
;                            6 = Failed to read from the specified process.
; Author(s):        Nomad
; Note(s):          Values returned are in Decimal format, unless specified as a 'char' type, then
;                   they are returned in ASCII format.  Also note that size ('char[size]') for all
;                   'char' types should be 1 greater than the actual size.
;=================================================================================================
Func _MemoryRead($iv_Address, $ah_Handle, $sv_Type = 'dword')

    If Not IsArray($ah_Handle) Then
        SetError(1)
        Return 0
    EndIf

    Local $v_Buffer = DllStructCreate($sv_Type)

    If @Error Then
        SetError(@Error + 1)
        Return 0
    EndIf

    DllCall($ah_Handle[0], 'int', 'ReadProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '')

    If Not @Error Then
        Local $v_Value = DllStructGetData($v_Buffer, 1)
        Return $v_Value
    Else
        SetError(6)
        Return 0
    EndIf

EndFunc

;=================================================================================================
; Function:         _MemoryWrite($iv_Address, $ah_Handle, $v_Data(, $sv_Type))
; Description:      Writes data to the specified memory address.
; Parameter(s):     $iv_Address - The memory address you want to write to.  It must be in hex
;                                 format (0x00000000).
;                   $ah_Handle - An array containing the Dll handle and the handle of the open
;                                process as returned by _MemoryOpen().
;                   $v_Data - The data to be written.
;                   $sv_Type - (optional) The "Type" of value you intend to write.  This is set to
;                               'dword'(32bit(4byte) signed integer) by default.  See the help file
;                               for DllStructCreate for all types.
;                               An example: If you want to write a word that is 15 characters in
;                               length, you would use 'char[16]'.
; Requirement(s):   The $ah_Handle returned from _MemoryOpen.
; Return Value(s):  On Success - Returns 1
;                   On Failure - Returns 0
;                   @Error - 0 = No error.
;                            1 = Invalid $ah_Handle.
;                            2 = $sv_Type was not a string.
;                            3 = $sv_Type is an unknown data type.
;                            4 = Failed to allocate the memory needed for the DllStructure.
;                            5 = Error allocating memory for $sv_Type.
;                            6 = $v_Data is not in the proper format to be used with the "Type"
;                                selected for $sv_Type, or it is out of range.
;                            7 = Failed to write to the specified process.
; Author(s):        Nomad
; Note(s):          Values sent must be in Decimal format, unless specified as a 'char' type, then
;                   they must be in ASCII format.  Also note that size ('char[size]') for all
;                   'char' types should be 1 greater than the actual size.
;=================================================================================================
Func _MemoryWrite($iv_Address, $ah_Handle, $v_Data, $sv_Type = 'dword')

    If Not IsArray($ah_Handle) Then
        SetError(1)
        Return 0
    EndIf

    Local $v_Buffer = DllStructCreate($sv_Type)

    If @Error Then
        SetError(@Error + 1)
        Return 0
    Else
        DllStructSetData($v_Buffer, 1, $v_Data)
        If @Error Then
            SetError(6)
            Return 0
        EndIf
    EndIf

    DllCall($ah_Handle[0], 'int', 'WriteProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '')

    If Not @Error Then
        Return 1
    Else
        SetError(7)
        Return 0
    EndIf

EndFunc

;=================================================================================================
; Function:         _MemoryClose($ah_Handle)
; Description:      Closes the process handle opened by using _MemoryOpen().
; Parameter(s):     $ah_Handle - An array containing the Dll handle and the handle of the open
;                                process as returned by _MemoryOpen().
; Requirement(s):   The $ah_Handle returned from _MemoryOpen.
; Return Value(s):  On Success - Returns 1
;                   On Failure - Returns 0
;                   @Error - 0 = No error.
;                            1 = Invalid $ah_Handle.
;                            2 = Unable to close the process handle.
; Author(s):        Nomad
; Note(s):
;=================================================================================================
Func _MemoryClose($ah_Handle)

    If Not IsArray($ah_Handle) Then
        SetError(1)
        Return 0
    EndIf

    DllCall($ah_Handle[0], 'int', 'CloseHandle', 'int', $ah_Handle[1])
    If Not @Error Then
        DllClose($ah_Handle[0])
        Return 1
    Else
        DllClose($ah_Handle[0])
        SetError(2)
        Return 0
    EndIf

EndFunc

;=================================================================================================
; Function:         _MemoryPointerRead ($iv_Address, $ah_Handle, $av_Offset(, $sv_Type))
; Description:      Reads a chain of pointers and returns an array containing the destination
;                   address and the data at the address.
; Parameter(s):     $iv_Address - The static memory address you want to start at. It must be in
;                                 hex format (0x00000000).
;                   $ah_Handle - An array containing the Dll handle and the handle of the open
;                                process as returned by _MemoryOpen().
;                   $av_Offset - An array of offsets for the pointers.  Each pointer must have an
;                                offset.  If there is no offset for a pointer, enter 0 for that
;                                array dimension. (Offsets must be in decimal format, NOT hex!)
;                   $sv_Type - (optional) The "Type" of data you intend to read at the destination
;                                address.  This is set to 'dword'(32bit(4byte) signed integer) by
;                                default.  See the help file for DllStructCreate for all types.
; Requirement(s):   The $ah_Handle returned from _MemoryOpen.
; Return Value(s):  On Success - Returns an array containing the destination address and the value
;                                located at the address.
;                   On Failure - Returns 0
;                   @Error - 0 = No error.
;                            1 = $av_Offset is not an array.
;                            2 = Invalid $ah_Handle.
;                            3 = $sv_Type is not a string.
;                            4 = $sv_Type is an unknown data type.
;                            5 = Failed to allocate the memory needed for the DllStructure.
;                            6 = Error allocating memory for $sv_Type.
;                            7 = Failed to read from the specified process.
; Author(s):        Nomad
; Note(s):          Values returned are in Decimal format, unless a 'char' type is selected.
;                   Set $av_Offset like this:
;                   $av_Offset[0] = NULL (not used)
;                   $av_Offset[1] = Offset for pointer 1 (all offsets must be in Decimal)
;                   $av_Offset[2] = Offset for pointer 2
;                   etc...
;                   (The number of array dimensions determines the number of pointers)
;=================================================================================================
Func _MemoryPointerRead ($iv_Address, $ah_Handle, $av_Offset, $sv_Type = 'dword')

    If IsArray($av_Offset) Then
        If IsArray($ah_Handle) Then
            Local $iv_PointerCount = UBound($av_Offset) - 1
        Else
            SetError(2)
            Return 0
        EndIf
    Else
        SetError(1)
        Return 0
    EndIf

    Local $iv_Data[2], $i
    Local $v_Buffer = DllStructCreate('dword')

    For $i = 0 to $iv_PointerCount

        If $i = $iv_PointerCount Then
            $v_Buffer = DllStructCreate($sv_Type)
            If @Error Then
                SetError(@Error + 2)
                Return 0
            EndIf

            $iv_Address = '0x' & hex($iv_Data[1] + $av_Offset[$i])
            DllCall($ah_Handle[0], 'int', 'ReadProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '')
            If @Error Then
                SetError(7)
                Return 0
            EndIf

            $iv_Data[1] = DllStructGetData($v_Buffer, 1)

        ElseIf $i = 0 Then
            DllCall($ah_Handle[0], 'int', 'ReadProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '')
            If @Error Then
                SetError(7)
                Return 0
            EndIf

            $iv_Data[1] = DllStructGetData($v_Buffer, 1)

        Else
            $iv_Address = '0x' & hex($iv_Data[1] + $av_Offset[$i])
            DllCall($ah_Handle[0], 'int', 'ReadProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '')
            If @Error Then
                SetError(7)
                Return 0
            EndIf

            $iv_Data[1] = DllStructGetData($v_Buffer, 1)

        EndIf

    Next

    $iv_Data[0] = $iv_Address

    Return $iv_Data

EndFunc

;=================================================================================================
; Function:         _MemoryPointerWrite ($iv_Address, $ah_Handle, $av_Offset, $v_Data(, $sv_Type))
; Description:      Reads a chain of pointers and writes the data to the destination address.
; Parameter(s):     $iv_Address - The static memory address you want to start at. It must be in
;                                 hex format (0x00000000).
;                   $ah_Handle - An array containing the Dll handle and the handle of the open
;                                process as returned by _MemoryOpen().
;                   $av_Offset - An array of offsets for the pointers.  Each pointer must have an
;                                offset.  If there is no offset for a pointer, enter 0 for that
;                                array dimension.
;                   $v_Data - The data to be written.
;                   $sv_Type - (optional) The "Type" of data you intend to write at the destination
;                                address.  This is set to 'dword'(32bit(4byte) signed integer) by
;                                default.  See the help file for DllStructCreate for all types.
; Requirement(s):   The $ah_Handle returned from _MemoryOpen.
; Return Value(s):  On Success - Returns the destination address.
;                   On Failure - Returns 0.
;                   @Error - 0 = No error.
;                            1 = $av_Offset is not an array.
;                            2 = Invalid $ah_Handle.
;                            3 = Failed to read from the specified process.
;                            4 = $sv_Type is not a string.
;                            5 = $sv_Type is an unknown data type.
;                            6 = Failed to allocate the memory needed for the DllStructure.
;                            7 = Error allocating memory for $sv_Type.
;                            8 = $v_Data is not in the proper format to be used with the
;                                "Type" selected for $sv_Type, or it is out of range.
;                            9 = Failed to write to the specified process.
; Author(s):        Nomad
; Note(s):          Data written is in Decimal format, unless a 'char' type is selected.
;                   Set $av_Offset like this:
;                   $av_Offset[0] = NULL (not used, doesn't matter what's entered)
;                   $av_Offset[1] = Offset for pointer 1 (all offsets must be in Decimal)
;                   $av_Offset[2] = Offset for pointer 2
;                   etc...
;                   (The number of array dimensions determines the number of pointers)
;=================================================================================================
Func _MemoryPointerWrite ($iv_Address, $ah_Handle, $av_Offset, $v_Data, $sv_Type = 'dword')

    If IsArray($av_Offset) Then
        If IsArray($ah_Handle) Then
            Local $iv_PointerCount = UBound($av_Offset) - 1
        Else
            SetError(2)
            Return 0
        EndIf
    Else
        SetError(1)
        Return 0
    EndIf

    Local $iv_StructData, $i
    Local $v_Buffer = DllStructCreate('dword')

    For $i = 0 to $iv_PointerCount
        If $i = $iv_PointerCount Then
            $v_Buffer = DllStructCreate($sv_Type)
            If @Error Then
                SetError(@Error + 3)
                Return 0
            EndIf

            DllStructSetData($v_Buffer, 1, $v_Data)
            If @Error Then
                SetError(8)
                Return 0
            EndIf

            $iv_Address = '0x' & hex($iv_StructData + $av_Offset[$i])
            DllCall($ah_Handle[0], 'int', 'WriteProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '')
            If @Error Then
                SetError(9)
                Return 0
            Else
                Return $iv_Address
            EndIf
        ElseIf $i = 0 Then
            DllCall($ah_Handle[0], 'int', 'ReadProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '')
            If @Error Then
                SetError(3)
                Return 0
            EndIf

            $iv_StructData = DllStructGetData($v_Buffer, 1)

        Else
            $iv_Address = '0x' & hex($iv_StructData + $av_Offset[$i])
            DllCall($ah_Handle[0], 'int', 'ReadProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '')
            If @Error Then
                SetError(3)
                Return 0
            EndIf

            $iv_StructData = DllStructGetData($v_Buffer, 1)

        EndIf
    Next

EndFunc


;==================================================================================
; Function:            SetPrivilege( $privilege, $bEnable )
; Description:        Enables (or disables) the $privilege on the current process
;                   (Probably) requires administrator privileges to run
;
; Author(s):        Larry (from autoitscript.com's Forum)
; Notes(s):
; http://www.autoitscript.com/forum/index.php?s=&showtopic=31248&view=findpost&p=223999
;==================================================================================

Func SetPrivilege( $privilege, $bEnable )
    Const $TOKEN_ADJUST_PRIVILEGES = 0x0020
    Const $TOKEN_QUERY = 0x0008
    Const $SE_PRIVILEGE_ENABLED = 0x0002
    Local $hToken, $SP_auxret, $SP_ret, $hCurrProcess, $nTokens, $nTokenIndex, $priv
    $nTokens = 1
    $LUID = DLLStructCreate("dword;int")
    If IsArray($privilege) Then    $nTokens = UBound($privilege)
    $TOKEN_PRIVILEGES = DLLStructCreate("dword;dword[" & (3 * $nTokens) & "]")
    $NEWTOKEN_PRIVILEGES = DLLStructCreate("dword;dword[" & (3 * $nTokens) & "]")
    $hCurrProcess = DLLCall("kernel32.dll","hwnd","GetCurrentProcess")
    $SP_auxret = DLLCall("advapi32.dll","int","OpenProcessToken","hwnd",$hCurrProcess[0],   _
            "int",BitOR($TOKEN_ADJUST_PRIVILEGES,$TOKEN_QUERY),"int*",0)
    If $SP_auxret[0] Then
        $hToken = $SP_auxret[3]
        DLLStructSetData($TOKEN_PRIVILEGES,1,1)
        $nTokenIndex = 1
        While $nTokenIndex <= $nTokens
            If IsArray($privilege) Then
                $ntokenvar=$ntokenindex-1
                $priv = $privilege[$ntokenvar]
            Else
                $priv = $privilege
            EndIf
            $ret = DLLCall("advapi32.dll","int","LookupPrivilegeValue","str","","str",$priv,   _
                    "ptr",DLLStructGetPtr($LUID))
            If $ret[0] Then
                If $bEnable Then
                    DLLStructSetData($TOKEN_PRIVILEGES,2,$SE_PRIVILEGE_ENABLED,(3 * $nTokenIndex))
                Else
                    DLLStructSetData($TOKEN_PRIVILEGES,2,0,(3 * $nTokenIndex))
                EndIf
                DLLStructSetData($TOKEN_PRIVILEGES,2,DllStructGetData($LUID,1),(3 * ($nTokenIndex-1)) + 1)
                DLLStructSetData($TOKEN_PRIVILEGES,2,DllStructGetData($LUID,2),(3 * ($nTokenIndex-1)) + 2)
                DLLStructSetData($LUID,1,0)
                DLLStructSetData($LUID,2,0)
            EndIf
            $nTokenIndex += 1
        WEnd
        $ret = DLLCall("advapi32.dll","int","AdjustTokenPrivileges","hwnd",$hToken,"int",0,   _
                "ptr",DllStructGetPtr($TOKEN_PRIVILEGES),"int",DllStructGetSize($NEWTOKEN_PRIVILEGES),   _
                "ptr",DllStructGetPtr($NEWTOKEN_PRIVILEGES),"int*",0)
        $f = DLLCall("kernel32.dll","int","GetLastError")
    EndIf
    $NEWTOKEN_PRIVILEGES=0
    $TOKEN_PRIVILEGES=0
    $LUID=0
    If $SP_auxret[0] = 0 Then Return 0
    $SP_auxret = DLLCall("kernel32.dll","int","CloseHandle","hwnd",$hToken)
    If Not $ret[0] And Not $SP_auxret[0] Then Return 0
    return $ret[0]
EndFunc  ;==>SetPrivilege
#endregion

Por cierto. Si uso la dirección dinámica final obtengo el valor correcto. No entiendo qué pasa. He probado con otras formas que he visto googleando pero aún nada.


___________________________________
En respuesta al post que estaba escrito en inglés:
Tenía el post escrito de otro foro (quiero decir que el post lo he escrito originalmente yo, no es un copy/paste de nadie) y estaba muy atareado así que como no vi ninguna regla que obligara a hablar en castellano (también puedo estar ciego) lo copié para no perder tiempo.

En fin. Disculpad las molestias en cualquier caso.
3  Programación / Programación C/C++ / Ejecutable autoextraible en: 20 Noviembre 2013, 16:59 pm
Buenas a todos.

Llevo muy poco tiempo en C++ y venía a hacer una consulta a ver si me podéis dar un poco de información.

Estoy haciendo un programa para ejecutar otro ejecutable que hay dentro del proyecto pero tengo problemas para hacerlo...

Primero que no sé ni siquiera si es posible eso, pero me he guiado un poco por este tema de aquí: http://foro.elhacker.net/programacion_cc/ejecutar_exe_desde_c-t310021.0.html

En principio el CreateProcess está claro, lo que no sé es cómo ejecutar un archivo que está incluido en el paquete. No sé si me termino de explicar... Todo el proyecto acabaría dentro de un sólo ejecutable. No es que el otro ejecutable estuviera en la carpeta del ejecutable final.

He probado con direcciones como "/archivo.exe" esperando que lo tomase como una dirección relativa al proyecto pero nope.

Para aclarar cosas vengo de Java, donde tampoco es que sea un experto pero me manejo.

Muchas gracias.

P.D.: Para más información decir que no lo voy a usar con fines malignos. Es para guardar el cliente editado de mi servidor de un juego para que no puedan hacer ediciones sobre él ya que hay muchas herramientas que fácilmente lo hacen. Pero si el ejecutable está dentro de mi ejecutable personalizado la cosa cambia.

P.D. 2: También he estado leyendo sobre los pipes para capturar el output de un programa. Pregunta 2: ¿Me serviría un pipe para capturar el output del programa sabiendo que el programa está dentro del mismo paquete?

Lo siento si son preguntas muy tontas. Gracias de antemano.

P.D. 3: Se me olvidaba que el ejecutable que va dentro del paquete no puedo descomprimirlo en otra carpeta que no sea la del juego porque requiere una serie de librerías que hay en la carpeta para iniciar. Y ahí está el problema, no quiero dejarlo a la vista en la carpeta del juego para que no puedan editar el cliente...
4  Programación / Programación General / cifrado de archivos ejecutables. en: 16 Septiembre 2013, 03:17 am
Buenas a todos!

Quería ver si alguien podía iluminarme.

Imagino que todos, o casi todos, conocéis programas como el Themida. Lo que quiero saber es cómo hacer un programa de cifrado de ejecutables. Es decir, como el themida y tal. No como otros programas que lo que hacen es protegerlos con contraseña y tal... Creo que me explico, sino decídmelo. Si además podéis ponerme ejemplos de código o lo que veáis conveniente. Muchas gracias y ya busqué en google. (no fue la primera vez)
5  Comunicaciones / Dispositivos Móviles (PDA's, Smartphones, Tablets) / Código fuente de un telefono móvil. en: 13 Abril 2011, 19:17 pm
Hola a todos.

Bueno, he estado leyendo por ahi sobre los Box, y todo ese royo para desbloquear un móvil...

Bueno, a mi eso no me interesa. Tengo mucha curiosidad por ver el código fuente de un movil cualquiera, por ver la estructura y tal. Y bueno, no tengo idea de como se podria hacer eso, o directamente si es posible...

Alguien es capaz de iluminarme? Gracias.
6  Seguridad Informática / WarZone / Pistas sobre la prueba de Spoof. en: 21 Marzo 2011, 10:41 am
Buenas a todos, he estado dando vueltas, pensando, y mirando el html de la pagina, y bueno, he visto que tiene un script vinculado de google analytics. He pensado que puede ser por ahí por donde van los tiros para la prueba del spoofing, alguien puede iluminarme? D:

Edito: Con "iluminarme" me refiero a una pequeña pistita, o un simple "Si" o "No". Gracias.
Páginas: [1]
WAP2 - Aviso Legal - Powered by SMF 1.1.21 | SMF © 2006-2008, Simple Machines