|
Mostrar Mensajes
|
Páginas: [1]
|
1
|
Seguridad Informática / Hacking Wireless / Tengo claves PERO NO CONECTA ayuda
|
en: 13 Marzo 2011, 00:51 am
|
Muy buenas,despues de mucho mirar vuestras excelentes guias sobre seguridad y hacking wireless con wifiway 2.0 consegui la clave...Uso el programa RaUI que me viene con los drivers de mi tarjeta Wifi,ipero ntroduzco la clave WEP,y nada...Dice que conecta pero no ni escoje IP ni puedo navegar para nada.Mire en varios foros y me informe,sin una conclusion clara...Debo atenerme a vuestra sabiduria a mucho pesar:
Estamos hablando a las claras de un filtrado MAC?
Que procedimientos deberia seguir?
Ademas tengo un router Conceptronic C54BRS4 Broadband con el he llegado a conectarme a conexiones sin cifrar,pero aun no he conseguido entrar a una conexion cifrada,que tengo otra WEP que si suele funcionar desde Ralink a baja señal, pero aqui ni funciona,probe lo siguiente:
LAN Settings
You can enable the Broadband router's DHCP server to dynamically allocate IP Addresses to your LAN client PCs. The broadband router must have an IP Address for the Local Area Network.
LAN IP IP Address : 192.168.2.1 Ip de mi router,si la cambio ya no puedo acceder IP Subnet Mask : 255.255.255.0 802.1d Spanning Tree : DISABLED DHCP Server : DISABLED
Wireless Settings
The gateway can be quickly configured as a wireless access point for roaming clients by setting the access identifier and channel number. It also supports data encryption and client filtering.
ENABLED
Security
This page allows you setup the wireless security. Turn on WEP or WPA by using Encryption Keys could prevent any unauthorized access to your wireless network.
Aqui viene mi duda,es solamente para crearte una propia clave WEP particular o tambien sirve para conectarte a otra WEP?
Ahi añadi la clave WEP del individuo en cuestion...
Wireless Setting
This page allows you to define ESSID, and Channel for the wireless connection. These parameters are used for the wireless stations to connect to the Access Point.
Mode : Station infraestructure Band : 24 GHZ B+G ESSID : WLAN Channel Number : 13 Site Survey : selecciono conexion WLAN WLAN MAC : 000000000000
Cargo y cuando le doy ala conexion WLAN dice:
Conect succesfull...Pero tiro de ping y nada,ademas tampoco cambia mi ip ni nada
Aparte del problema en si de no poder conectarme con la clave WEP,me gustaria si alguien puede aclararme aunque sea si es posible conectarse a claves WEP/WPA desde el router Conceptronic C54BRS4 ya que creo que pilla mejor señal que desde mi tarjeta wifi Ralink.
Gracias y disculpa sino me explique del todo bien
|
|
|
2
|
Seguridad Informática / Wireless en Linux / Re: No pasa de Sending Authentification Request (Open system) wifiway 2.0
|
en: 9 Marzo 2011, 21:21 pm
|
Aqui el paso en el cual me quedo TEXTUALMENTE
wifiway ~ # aireplay-ng -1 30 -e WLAN_XX -a 00:XX:CF:XX:07:XX -h 00:XX:A5:XX:C5:XX mon0 21:08:00 Waiting for beacon frame (BSSID: 00:XX:CF:XX:07:XX) on channel 13
21:08:01 Sending Authentication Request (Open System)
21:08:03 Sending Authentication Request (Open System)
21:08:05 Sending Authentication Request (Open System)
21:08:07 Sending Authentication Request (Open System)
21:08:09 Sending Authentication Request (Open System)
21:08:11 Sending Authentication Request (Open System)
21:08:13 Sending Authentication Request (Open System)
21:08:15 Sending Authentication Request (Open System)
21:08:17 Sending Authentication Request (Open System)
21:08:19 Sending Authentication Request (Open System)
21:08:21 Sending Authentication Request (Open System)
21:08:23 Sending Authentication Request (Open System)
21:08:25 Sending Authentication Request (Open System)
21:08:27 Sending Authentication Request (Open System)
21:08:29 Sending Authentication Request (Open System)
21:08:31 Sending Authentication Request (Open System) Attack was unsuccessful. Possible reasons:
* Perhaps MAC address filtering is enabled. * Check that the BSSID (-a option) is correct. * Try to change the number of packets (-o option). * The driver/card doesn't support injection. * This attack sometimes fails against some APs. * The card is not on the same channel as the AP. * You're too far from the AP. Get closer, or lower the transmit rate.
|
|
|
4
|
Seguridad Informática / Wireless en Linux / No pasa de Sending Authentification Request (Open system) wifiway 2.0
|
en: 9 Marzo 2011, 17:35 pm
|
Muy buenas,empezemos...Quiero descifrar una clave WEP pero me da muchos problemas,ya lo consegui con otra (curiosamente guiandome con la guia de wifislax 3.1,pero desde wifiway 2.0),la que intento ahora parece ser de las mismas caracteristicas,pero por alguna razon no me deja inyectar...Empiezo aqui :
Hice iwconfig y si me detecto la tarjeta supuestamente como eth0
Ponia en ella Ralink 2573 (CHIPSET) RT73 USB (driver que usa,imagino)
Despues con airmon-ng start mon0 6
Me dijo que lo que tiene modo monitor es "mon0" asi que me olvide de eth0 y segui con mon0
Despues puse el comando
airodump-ng -w LOL(NOMBRE FICHERO) -c6(CANAL) mon0 (dispositivo monitorizado)
Empiezan a salir datos,los necesarios para conectar con la red,abri nueva consola y apunte lo siguiente:
(HASTA AQUI PIENSO QUE TODO CORRECTO)
aireplay-ng -1 30 -eLOL(ESSID) -a MACV(MAC RECEPTOR) -h MACC(MI MAC)
Y nada,no se asocia,se queda soltando repetidamente
Sending Authentification Request (Open system)
Sending Authentification Request (Open system)
Sending Authentification Request (Open system)
Sending Authentification Request (Open system)
Attack was unsuccesful
Probe varias veces y siempre es igual...Que podria ser el problema?
(ESTO ES CON OTRO WEP,PERO ES PARA QUE SACAR ALGUNA CONCLUSION)
Con el otro WEP que desencripte me empezo a soltar :
Sending Authentification Request (Open system) Authetification sucessful Sending Association Request
REPITE
Sending Authentification Request (Open system) Authetification sucessful Sending Association Request
MAS UNA LINEA NUEVA
Association sucessful : ) (AID : 1)
REPITE
Sending Authentification Request (Open system) Authetification sucessful Sending Association Request Association sucessful : ) (AID : 1)
MAS UNA LINEA NUEVA
Sending Keep-alive packet
REPITE
Sending Authentification Request (Open system) Authetification sucessful Sending Association Request Association sucessful : ) (AID : 1) Sending Keep-alive packet
ASI INFINITAMENTE... (RARO NO?,NO DEBERIA HABERSE PARADO Y AHI SEGUIR CON EL COMANDO DE INYECCION?)
El caso es que al ver el bucle se me ocurrio seguir la guia con una consola nueva,y tube suerte...
INYECTION WORK
Read 4000 packets (got 389 ARP Request And 121 Acks) Send 356 packets (opps) Despues pude sacar la clave...Pero no es la que me interesa,por eso,sigo clavado aqui por la otra:
Sending Authentification Request (Open system)
Sending Authentification Request (Open system)
Sending Authentification Request (Open system)
Sending Authentification Request (Open system)
Attack was unsuccesful
Que puedo intentar para que me salga como con la otra WEP?
Pd: como puedo cambiar mi MAC ? (de la tarjeta wifi imagino)Probe con macchanger pero me lo impide,solo me deja cambiar la MAC de la tarjeta de red y ademas si la cambio cuando paso a inyectar da error.
Perdonad sino me explique del todo bien pero es que soy muy novato en esto...
GRACIAS
|
|
|
5
|
Seguridad Informática / Wireless en Linux / Re: Necesito ayuda...No wireless extension con Ralink en wifilax 3.0
|
en: 9 Marzo 2011, 00:54 am
|
A ver,veamos...Avance mucho con wifiway 2.0
Hice iwconfig y si me detecto la tarjeta supuestamente como eth0
Ponia en ella Ralink 2573 RT73 USB
Despues con airmon-ng start mon0 6
Me dijo que lo que tiene modo monitor es "mon0" asi que me olvide de eth0 y segui con mon0
Despues puse el comando
airodump-ng -w LOL(NOMBRE FICHERO) -c6(CANAL) mon0 (dispositivo monitorizado)
Empiezan a salir datos,los necesarios para conectar con la red,abri nueva consola y apunte lo siguiente:
(HASTA AQUI PIENSO QUE TODO CORRECTO)
aireplay-ng -1 30 -eLOL(ESSID) -a MACV(MAC RECEPTOR) -h MACC(MI MAC)
Y nada,no se asocia,se queda soltando repetidamente
Sending Authentification Request (Open system)
Sending Authentification Request (Open system)
Sending Authentification Request (Open system)
Sending Authentification Request (Open system)
Attack was unsuccesful
Probe varias veces y siempre es igual...Que podria ser el problema? El receptor desdeluego que es encriptacion WEP,espero alguna ayuda gracias.
|
|
|
7
|
Seguridad Informática / Wireless en Linux / Necesito ayuda...No wireless extension con Ralink en wifilax 3.0
|
en: 7 Marzo 2011, 18:48 pm
|
Muy buenas,para empezar decir que soy nuevo en esto.Os comento,pruebo a monitorizar e inyectar con mi tarjeta pero en el primer paso de todos ya no puedo hace nada,porque inicie mi pc desde wifislax 3.0 startx para iniciar y en el primer paso:
iwconfig me pone
lo no wireless extensions
Tambien probe con lspci y en principio detecta mi tarjeta Ralink que ponia esto-
Lan controler (rev2) (ICH7) Family
Incluso vi la placa desmontada,con cierta informacion sobre el aparato que pondre por si aclara algo:
GEMTEK WUBR177 RALINK RT2571
TAMBIEN PONIA LA MAC
Probe tambien las 3 opciones del wifilax 3.0 sobre ralink que hacia inyeccion y demas,la cual ponia si mal no recuerdo que no tiene los modulos.Tambien probe los distintos programas como el airodump aircrack y demas...Parece que si detectaba y recibia señales..Nose si eso significa algo bueno o no.
Me referia con eso que aunque eso funcione si no puedo hacer nada porque en el primer paso ya no puedo segir la guia,mis preguntas son:
No sera que mi tarjeta no es compatible? Que pasos debo seguir para aclarar el problema? Deberia probar la version de WifiWay?Es mejor?
Losiento sino me explique bien pero de esto la verdad que soy un principiante...Necesito saber por donde segir ya que mire bastante por los foros sin aclarar casi nada..
Gracias de antemano y saludos
|
|
|
|
|
|
|