Hola. Necesito ayuda por favor, estoy armando una topologia bastante sencilla de router on stick. tengo un problema de comunicación con mis dispositivos finales, que en este caso es un Server y un PC. Cada uno llega al gateway del otro pero no se comunican entre si, ayuda porfavor. adjunto configuraciones.
Router:
Router#sh run Building configuration...
Current configuration : 1241 bytes ! version 15.1 no service timestamps log datetime msec no service timestamps debug datetime msec no service password-encryption ! hostname Router ! ! ! ! ip dhcp excluded-address 100.100.100.1 100.100.100.5 ip dhcp excluded-address 200.200.200.1 200.200.200.5 ! ip dhcp pool Adm&Red network 100.100.100.0 255.255.255.0 default-router 100.100.100.1 dns-server 100.100.100.5 ip dhcp pool Ventas network 200.200.200.0 255.255.255.0 default-router 200.200.200.254 dns-server 100.100.100.5 ! ! ! no ip cef no ip routing ! no ipv6 cef ! ! ! ! license udi pid CISCO2911/K9 sn FTX1524467Y ! ! ! ! ! ! ! ! ! ! ! spanning-tree mode pvst ! ! ! ! ! ! interface GigabitEthernet0/0 no ip address duplex auto speed auto ! interface GigabitEthernet0/0.100 encapsulation dot1Q 100 native ip address 100.100.100.1 255.255.255.0 ! interface GigabitEthernet0/0.200 encapsulation dot1Q 200 ip address 200.200.200.254 255.255.255.0 ! interface GigabitEthernet0/1 no ip address duplex auto speed auto shutdown ! interface GigabitEthernet0/2 no ip address duplex auto speed auto shutdown ! interface Vlan1 no ip address shutdown ! ip classless ! ip flow-export version 9 ! ! ! ! ! ! ! line con 0 ! line aux 0 ! line vty 0 4 login ! ! ! end