Título: Usb Wifi TL-WN422G + Antena Wireless 9dbi Publicado por: jdepaz en 15 Junio 2010, 17:12 pm Hola buen dia,
tengo un adaptador USB TpLink TL-WN422G el cual tiene una antena desmontable de 4dbi, ahora le compre una antena con las siguientes especificaciones: +9dBi 15" 3x WiFi Booster Antenna (RP-SMA connectior) for Linksys WET11, WET54G, WMP11 PCI Card, WPS11, WMP54G, WMP54GS, WRT54GC Link: http://www.amazon.com/Booster-Antenna-connectior-Linksys-WMP54GS/dp/B000SEN9U6/ref=sr_1_2?ie=UTF8&s=videogames&qid=1276614361&sr=8-2 (http://www.amazon.com/Booster-Antenna-connectior-Linksys-WMP54GS/dp/B000SEN9U6/ref=sr_1_2?ie=UTF8&s=videogames&qid=1276614361&sr=8-2) y la USB tiene las especificaciones que describo abajo, ahora la cuestion es que actualmente, con el NetWorkStumbler estoy haciendo las pruebas y recibo la misma intensidad de señal que con la antena de 4dbi. ?alguien que me explique que pasa? o segun, podria decir que necesito un adaptador con mas MW Saludos Software Specification Standards IEEE 802.11g, IEEE 802.11b Wireless Signal Rates With Automatic Fallback 11g: Up to 54Mbps (Dynamic) 11b: Up to 11Mbps (Dynamic) Frequency Range 2.4-2.4835GHz Wireless Transmit Power 20dBm(MAX)(EIRP-total effective radiated power is 20 dBm(100mW), antenna gain will not influence wireless transmit power) Modulation Type 1M DBPSK, 2M DQPSK, 5.5M/11M CCK, 6M/9M/12M/18M/24M/36M/48M/54M OFDM Receiver Sensitivity (without antenna) 54M: -68dBm@10% PER 11M: -85dBm@8% PER 6M: -88dBm@10% PER 1M: -90dBm@8% PER 256K: -105dBm@8% PER Work Mode Ad-Hoc Infrastructure Wireless Security 64/128/256 bit WEP WPA/WPA2, WPA-PSK/WPA2-PSK (TKIP/AES) Support Operating System Windows 2000/XP/Vista Hardware Specification Interface USB2.0 Hi-Speed connector Antenna Type 4dBi Detachable Omni-directional Antenna Certifications CE, FCC Operating Temperature 0°C~40°C (32℉~104℉) Storage Temperature -40°C~70°C (-40℉~158℉) Relative Humidity 10% ~ 90%, non condensation Storage Humidity 5%~90% non-condensing Dimensions 3.7 x 1.0 x 0.4in. (93.5 x 26 x 11mm) |