Ayuda con httpd.conf OpenSuse
Cioouw:
Hola, pues mi lamp funciona perfecto, el unico problema es que no puedo acceder a mi webserver desde wan, tengo configurado el firewall y el servicio http para que tenga salida a wan (aparentemente) pero aun asi no logro conectarme desde la wan a mi pc, alquien me hecha una mano ...
Aqui dejo mi httpd.conf ... el server esta sobre OpenSuse 11.1
Citar
#
# /etc/apache2/httpd.conf
#
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs-2.2/> for detailed information about
# the directives.
# Based upon the default apache configuration file that ships with apache,
# which is based upon the NCSA server configuration files originally by Rob
# McCool. This file was knocked together by Peter Poeml <poeml+apache@suse.de>.
# If possible, avoid changes to this file. It does mainly contain Include
# statements and global settings that can/should be overridden in the
# configuration of your virtual hosts.
# Quickstart guide:
# http://www.opensuse.org/Apache_Howto_Quickstart
# Overview of include files, chronologically:
#
# httpd.conf
# |
# |-- uid.conf . . . . . . . . . . . . . . UserID/GroupID to run under
# |-- server-tuning.conf . . . . . . . . . sizing of the server (how many processes to start, ...)
# |-- sysconfig.d/loadmodule.conf . . . . . [*] load these modules
# |-- listen.conf . . . . . . . . . . . . . IP adresses / ports to listen on
# |-- mod_log_config.conf . . . . . . . . . define logging formats
# |-- sysconfig.d/global.conf . . . . . . . [*] server-wide general settings
# |-- mod_status.conf . . . . . . . . . . . restrict access to mod_status (server monitoring)
# |-- mod_info.conf . . . . . . . . . . . . restrict access to mod_info
# |-- mod_usertrack.conf . . . . . . . . . defaults for cookie-based user tracking
# |-- mod_autoindex-defaults.conf . . . . . defaults for displaying of server-generated directory listings
# |-- mod_mime-defaults.conf . . . . . . . defaults for mod_mime configuration
# |-- errors.conf . . . . . . . . . . . . . customize error responses
# |-- ssl-global.conf . . . . . . . . . . . SSL conf that applies to default server _and all_ virtual hosts
# |
# |-- default-server.conf . . . . . . . . . set up the default server that replies to non-virtual-host requests
# | |--mod_userdir.conf . . . . . . . . enable UserDir (if mod_userdir is loaded)
# | `--conf.d/apache2-manual?conf . . . add the docs ('?' = if installed)
# |
# |-- sysconfig.d/include.conf . . . . . . [*] your include files
# | (for each file to be included here, put its name
# | into APACHE_INCLUDE_* in /etc/sysconfig/apache2)
# |
# `-- vhosts.d/ . . . . . . . . . . . . . . for each virtual host, place one file here
# `-- *.conf . . . . . . . . . . . . . (*.conf is automatically included)
#
#
# Files marked [*] are created from sysconfig upon server restart: instead of
# these files, you edit /etc/sysconfig/apache2
# Filesystem layout:
#
# /etc/apache2/
# |-- charset.conv . . . . . . . . . . . . for mod_auth_ldap
# |-- conf.d/
# | |-- apache2-manual.conf . . . . . . . conf that comes with apache2-doc
# | |-- mod_php4.conf . . . . . . . . . . (example) conf that comes with apache2-mod_php4
# | `-- ... . . . . . . . . . . . . . . . other configuration added by packages
# |-- default-server.conf
# |-- errors.conf
# |-- httpd.conf . . . . . . . . . . . . . top level configuration file
# |-- listen.conf
# |-- magic
# |-- mime.types -> ../mime.types
# |-- mod_autoindex-defaults.conf
# |-- mod_info.conf
# |-- mod_log_config.conf
# |-- mod_mime-defaults.conf
# |-- mod_perl-startup.pl
# |-- mod_status.conf
# |-- mod_userdir.conf
# |-- mod_usertrack.conf
# |-- server-tuning.conf
# |-- ssl-global.conf
# |-- ssl.crl/ . . . . . . . . . . . . . . PEM-encoded X.509 Certificate Revocation Lists (CRL)
# |-- ssl.crt/ . . . . . . . . . . . . . . PEM-encoded X.509 Certificates
# |-- ssl.csr/ . . . . . . . . . . . . . . PEM-encoded X.509 Certificate Signing Requests
# |-- ssl.key/ . . . . . . . . . . . . . . PEM-encoded RSA Private Keys
# |-- ssl.prm/ . . . . . . . . . . . . . . public DSA Parameter Files
# |-- sysconfig.d/ . . . . . . . . . . . . files that are created from /etc/sysconfig/apache2
# | |-- global.conf
# | |-- include.conf
# | `-- loadmodule.conf
# |-- uid.conf
# `-- vhosts.d/ . . . . . . . . . . . . . . put your virtual host configuration (*.conf) here
# |-- vhost-ssl.template
# `-- vhost.template
### Global Environment ######################################################
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests.
# run under this user/group id
Include /etc/apache2/uid.conf
# - how many server processes to start (server pool regulation)
# - usage of KeepAlive
Include /etc/apache2/server-tuning.conf
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog /var/log/apache2/error_log
# generated from APACHE_MODULES in /etc/sysconfig/apache2
Include /etc/apache2/sysconfig.d/loadmodule.conf
# IP addresses / ports to listen on
Include /etc/apache2/listen.conf
# predefined logging formats
Include /etc/apache2/mod_log_config.conf
# generated from global settings in /etc/sysconfig/apache2
Include /etc/apache2/sysconfig.d/global.conf
# optional mod_status, mod_info
Include /etc/apache2/mod_status.conf
Include /etc/apache2/mod_info.conf
# optional cookie-based user tracking
# read the documentation before using it!!
Include /etc/apache2/mod_usertrack.conf
# configuration of server-generated directory listings
Include /etc/apache2/mod_autoindex-defaults.conf
# associate MIME types with filename extensions
TypesConfig /etc/apache2/mime.types
DefaultType text/plain
Include /etc/apache2/mod_mime-defaults.conf
# set up (customizable) error responses
Include /etc/apache2/errors.conf
# global (server-wide) SSL configuration, that is not specific to
# any virtual host
Include /etc/apache2/ssl-global.conf
# forbid access to the entire filesystem by default
<Directory />
Options None
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# use .htaccess files for overriding,
AccessFileName .htaccess
# and never show them
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
# List of resources to look for when the client requests a directory
DirectoryIndex index.html index.html.var
### 'Main' server configuration #############################################
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
Include /etc/apache2/default-server.conf
# Another way to include your own files
#
# The file below is generated from /etc/sysconfig/apache2,
# include arbitrary files as named in APACHE_CONF_INCLUDE_FILES and
# APACHE_CONF_INCLUDE_DIRS
Include /etc/apache2/sysconfig.d/include.conf
### Virtual server configuration ############################################
#
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs-2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.
#
Include /etc/apache2/vhosts.d/*.conf
# Note: instead of adding your own configuration here, consider
# adding it in your own file (/etc/apache2/httpd.conf.local)
# putting its name into APACHE_CONF_INCLUDE_FILES in
# /etc/sysconfig/apache2 -- this will make system updates
# easier :)
Nakp:
poco tiene que ver si accedes por lan, wan, inet, etc... pega estos archivos (si es que tienes)
/etc/apache2/listen.conf
/etc/apache2/vhosts.d/*.conf (si es que son varios)
o tendras que configurar un virtualhost para que tu apache escuche :P
en listen.conf deberia haber algo como
Código
Listen 80
o para la lan (wan, pan, san, tan, *an xDD)
Código
Listen 192.168.1.*:80
o como sea el rango de ips que tengas :P
Cioouw:
Este es el listen.conf
Citar
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports. See also the <VirtualHost> directive.
#
# http://httpd.apache.org/docs-2.2/mod/mpm_common.html#listen
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#
# When we also provide SSL we have to listen to the
# standard HTTP port (see above) and to the HTTPS port
#
# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two
# Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443"
#
#Listen 12.34.56.78:80
#Listen 80
#Listen 443
<IfDefine SSL>
<IfDefine !NOSSL>
<IfModule mod_ssl.c>
Listen 443
</IfModule>
</IfDefine>
</IfDefine>
# Use name-based virtual hosting
#
# - on a specified address / port:
#
#NameVirtualHost 12.34.56.78:80
#
# - name-based virtual hosting:
#
#NameVirtualHost *:80
#
# - on all addresses and ports. This is your best bet when you are on
# dynamically assigned IP addresses:
#
#NameVirtualHost *
Listen 80
Lo cambie a Listen 192.168.1.*:80 y no funciono .. Listen 192.168.1.20:80 tampoco funciono .. le puse Listen 127.0.0.1:80 y si funciono pero solo para LAN.
Este es el otro file
Citar
#
# VirtualHost template
# Note: to use the template, rename it to /etc/apache2/vhost.d/yourvhost.conf.
# Files must have the .conf suffix to be loaded.
#
# See /usr/share/doc/packages/apache2/README.QUICKSTART for further hints
# about virtual hosts.
#
# NameVirtualHost statements can be added to /etc/apache2/listen.conf.
#
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#
<VirtualHost *:80>
ServerAdmin webmaster@dummy-host.example.com
ServerName dummy-host.example.com
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot /srv/www/vhosts/dummy-host.example.com
# if not specified, the global error log is used
ErrorLog /var/log/apache2/dummy-host.example.com-error_log
CustomLog /var/log/apache2/dummy-host.example.com-access_log combined
# don't loose time with IP address lookups
HostnameLookups Off
# needed for named virtual hosts
UseCanonicalName Off
# configures the footer on server-generated documents
ServerSignature On
# Optionally, include *.conf files from /etc/apache2/conf.d/
#
# For example, to allow execution of PHP scripts:
#
# Include /etc/apache2/conf.d/mod_php4.conf
#
# or, to include all configuration snippets added by packages:
# Include /etc/apache2/conf.d/*.conf
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
#
ScriptAlias /cgi-bin/ "/srv/www/vhosts/dummy-host.example.com/cgi-bin/"
# "/srv/www/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have one, and where ScriptAlias points to.
#
<Directory "/srv/www/vhosts/dummy-host.example.com/cgi-bin">
AllowOverride None
Options +ExecCGI -Includes
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received.
#
# To disable it, simply remove userdir from the list of modules in APACHE_MODULES
# in /etc/sysconfig/apache2.
#
<IfModule mod_userdir.c>
# Note that the name of the user directory ("public_html") cannot simply be
# changed here, since it is a compile time setting. The apache package
# would have to be rebuilt. You could work around by deleting
# /usr/sbin/suexec, but then all scripts from the directories would be
# executed with the UID of the webserver.
UserDir public_html
# The actual configuration of the directory is in
# /etc/apache2/mod_userdir.conf.
Include /etc/apache2/mod_userdir.conf
# You can, however, change the ~ if you find it awkward, by mapping e.g.
# http://www.example.com/users/karl-heinz/ --> /home/karl-heinz/public_html/
#AliasMatch ^/users/([a-zA-Z0-9-_.]*)/?(.*) /home/$1/public_html/$2
</IfModule>
#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/srv/www/vhosts/dummy-host.example.com">
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs-2.2/mod/core.html#options
# for more information.
#
Options Indexes FollowSymLinks
#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride None
#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
Nakp:
solo para lan? pero por que ip entras?
diras para localhost? deja solo listen 80 e intenta acceder con la ip de tu pc desde la que tiene wireless
suponiendo que el servidor esta en
192.168.1.16
y tu laptop (o lo que tenga wireless) esta conectada a la misma red... accede al servidor escribiendo la ip de este en tu laptop
http://192.168.1.16
(segun el ejemplo)
^Tifa^:
Haber es LAN o WAN??? Son dos cosas distintas :xD
Si descomentaste lo que te dijo Nakp (Para tu LAN):
Citar
Listen 192.168.1.20:80
Que es la IP local privada de tu PC con OpenSuse. Cuando hagas y guardes esos cambios, debes reiniciar el Apache:
/etc/init.d/httpd restart
Y luego en tu PC intentar navegar en un navegador:
http://192.168.1.20:80
(Donde 192.168.1.20 es la IP privada local de tu PC con OpenSuse).
Si conecta entonces intentalo desde otra PC de tu LAN y sino conecta desde otra PC revisa algun firewall local de OpenSuse (iptables puede ser). o algun firewall fisico (Pix)
Si me hablas de la WAN ya el procedimiento es un poco mas extenso, porque tendras que abrir puertos en tu router y redireccionar la peticion al puerto 80 hacia la IP de tu maquina con OpenSuse....
Pero exactamente que es lo que quieres LAN o WAN?
Navegación
[#] Página Siguiente