Todo ok funciona bien:
Pero una peticion, para los que usamos acer y algunos portatiles mas
porqué no se sustitulle en el \mnt\sdxx\etc\rc.d\rc.pcmcia
Por este otro que tambien funciona para asi, no tener que andar con lo del nopcmcia.
LLevo diciendo esto desde la version 1.2
#!/bin/sh
#
# rc.pcmcia 1.23 1998/07/18 18:49:26 (David Hinds)
# Modified for Slackware Thu Aug 3 21:02:36 CDT 2006 (pjv, pp)
#
# This is designed to work in BSD as well as SysV init setups. See
# the HOWTO for customization instructions.
usage()
{
echo "Usage: $0 {start|stop|restart}"
}
cleanup()
{
while read SN CLASS MOD INST DEV EXTRA ; do
if [ "$SN" != "Socket" ] ; then
/etc/pcmcia/$CLASS stop $DEV 2> /dev/null
fi
done
}
# Allow environment variables to override all options
if [ "$PCMCIA" ] ; then readonly PCMCIA ; fi
if [ "$PCIC" ] ; then readonly PCIC ; fi
if [ "$CORE_OPTS" ] ; then readonly CORE_OPTS ; fi
if [ "$CARDMGR_OPTS" ] ; then readonly CARDMGR_OPTS ; fi
if [ "$SCHEME" ] ; then readonly SCHEME ; fi
# Source PCMCIA configuration, if available
if [ -f /etc/pcmcia.conf ] ; then
. /etc/pcmcia.conf
elif [ -f /etc/sysconfig/pcmcia ] ; then
. /etc/sysconfig/pcmcia
if [ "$PCMCIA" != "yes" ] ; then exit 0 ; fi
else
# Should be either i82365, i82092, tcic, or yenta_socket.
# Can also be set to "probe" (a Slackware addition) which loads
# each module until one of them works. (this is the default)
PCIC=probe
# PCIC=i82365
# PCIC=tcic
# PCIC=yenta_socket
# The i82092 is found in old laptops and evaluation boards and will
# not be automatically probed for.
# PCIC=i82092
# Put pcmcia_core options here
CORE_OPTS=
# Put cardmgr options here
CARDMGR_OPTS=
# To set the PCMCIA scheme at startup...
SCHEME=
fi
EXITCODE=1
for x in "1" ; do
if [ "$PCIC" = "" ] ; then
echo "PCIC not defined in rc.pcmcia!"
break
fi
if [ $# -lt 1 ] ; then usage ; break ; fi
action=$1
case "$action" in
'start')
echo "Starting PCMCIA services:"
SC=/var/run/pcmcia-scheme
if [ -L $SC -o ! -O $SC ] ; then rm -f $SC ; fi
if [ ! -f $SC ] ; then umask 022 ; echo > $SC ; fi
if [ "$SCHEME" ] ; then umask 022 ; echo $SCHEME > $SC ; fi
fgrep -q pcmcia /proc/devices
if [ $? -ne 0 ] ; then
if [ -d "/lib/modules/`uname -r`/pcmcia" ]; then
PC="/lib/modules/`uname -r`/pcmcia"
elif [ -d "/lib/modules/`uname -r`/kernel/drivers/pcmcia" ]; then
PC="/lib/modules/`uname -r`/kernel/drivers/pcmcia"
fi
if [ -d $PC ] ; then
/sbin/modprobe pcmcia_core $CORE_OPTS 2> /dev/null
if [ "$PCIC" = "probe" ]; then # attempt to load both
echo " <Probing for PCIC: edit /etc/rc.d/rc.pcmcia>"
/sbin/modprobe i82365 2> /dev/null
if [ ! $? = 0 ]; then # try tcic
/sbin/modprobe tcic 2> /dev/null
fi
if [ ! $? = 0 ]; then # try yenta_socket
/sbin/modprobe yenta_socket 2> /dev/null
fi
else # PCIC has been selected manually
/sbin/modprobe $PCIC 2> /dev/null
fi
/sbin/modprobe ds 2> /dev/null
else
echo "No PCMCIA kernel modules for `uname -r` found."
break
fi
fi
# Check kernel version. Kernel 2.6 doesn't need cardmgr.
KERN_VER=$(uname -r | cut -f 1,2 -d . )
if [ "$KERN_VER" = "2.4" ]; then
if [ -r /var/run/stab ] ; then
cat /var/run/stab | cleanup
fi
/sbin/cardmgr $CARDMGR_OPTS
elif [ -s /var/run/cardmgr.pid ]; then
# Looks like cardmgr is being mistakenly run on a 2.6 kernel.
echo "Killing /sbin/cardmgr (not needed for new kernels)..."
kill -0 $(cat /var/run/cardmgr.pid) 2>/dev/null
fi
if [ -d /var/lock/subsys ] ; then
touch /var/lock/subsys/pcmcia
fi
;;
'stop')
if [ -r /var/run/cardmgr.pid ]; then
echo -n "Shutting down PCMCIA services:"
PID=`cat /var/run/cardmgr.pid`
kill $PID
echo -n " cardmgr"
# Give cardmgr a few seconds to handle the signal:
kill -0 $PID 2>/dev/null && sleep 2 && \
kill -0 $PID 2>/dev/null && sleep 2 && \
kill -0 $PID 2>/dev/null && sleep 2 && \
kill -0 $PID 2>/dev/null
if fgrep -q "ds " /proc/modules ; then
echo -n " modules"
/sbin/modprobe -r ds
if [ "$PCIC" = "probe" ]; then
if grep i82365 /proc/modules 1> /dev/null 2> /dev/null ; then
/sbin/modprobe -r i82365
elif grep yenta_socket /proc/modules 1> /dev/null 2> /dev/null ; then
/sbin/modprobe -r yenta_socket
elif grep tcic /proc/modules 1> /dev/null 2> /dev/null ; then
/sbin/modprobe -r tcic
fi
else
/sbin/modprobe -r $PCIC
fi
/sbin/modprobe -r pcmcia_core
fi
echo "."
rm -f /var/lock/subsys/pcmcia
fi
EXITCODE=0
;;
'restart')
$0 stop
$0 start
EXITCODE=0
;;
*)
usage
;;
esac
done
# Only exit if we're in our own subshell
if [ "${0##*/}" = "rc.pcmcia" ] ; then
exit $EXITCODE
fi
cortar, pegar y guardar con ese nombre rc.pcmcia, en esa ruta.
Tendremos que instalar en el hd, botear desde cd y luego sustituir el original pegar...
Esto es un poco burro, me refiero al espacio que ocupa si el modrador lo cree oportuno, lo borro.Si algien tiene tiempo que busque las fiferencias con el original, asi no posteamos esta burrada.no se como se crean adjuntos.
Saludos
Autor
En línea
